Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Mariner 350 a/c upgrade

Discussion of AC's, plumbing and sanitation related issues.
User avatar

Topic author United States of America
cstraubs
Scurvy Dog
Scurvy Dog
Posts: 2
Joined: July 21st, 2016, 9:29 pm

Mariner 350 a/c upgrade

Postby cstraubs » October 11th, 2017, 10:07 pm

I have a 1999 350 mariner needing a A/c refit. Stock unit is 16,500btu unit mounted under the front dash. It seems to be way undersized. I noticed the newer 360's moved to at least a 20k unit. Has anyone done an upgrade that they were satisfied with? I really don't want to have to do this twice..haha


Thanks Bobby

User avatar

United States of America
mjk1040
Admiral
Admiral
Posts: 1506
Joined: July 30th, 2015, 8:15 am
Vessel Info: 1998 355 AC/MY "Deja Vu"
Location: Savannah, NY
Has thanked: 9 times
Been thanked: 236 times

Re: Mariner 350 a/c upgrade

Postby mjk1040 » October 12th, 2017, 4:26 am

Bigger may be better! Do your research I'm sure no matter which way you go other then replacing with same exact unit your going to have to retrofit.
Mike :down:
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow

United States of America
tomschauer
CYO Supporter
CYO Supporter
Posts: 2290
Joined: March 28th, 2016, 10:52 pm
Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X
Location: upper chesapeake bay
Has thanked: 313 times
Been thanked: 581 times

Re: Mariner 350 a/c upgrade

Postby tomschauer » October 12th, 2017, 8:37 am

If you go to a higher capacity unit you most likely will have to modify the duct work to allow for the additional airflow or your coil will freeze up.
User avatar

Canada
bud37
Admiral
Admiral
Posts: 4676
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 547 times
Been thanked: 1142 times

Re: Mariner 350 a/c upgrade

Postby bud37 » October 12th, 2017, 8:39 am

cstraubs wrote:Source of the post I have a 1999 350 mariner needing a A/c refit. Stock unit is 16,500btu unit mounted under the front dash. It seems to be way undersized. I noticed the newer 360's moved to at least a 20k unit. Has anyone done an upgrade that they were satisfied with? I really don't want to have to do this twice..haha


Thanks Bobby

There was an option for a second smaller unit mounted under the salon seating by the galley I believe in some years, that could be a possibility......actually in ours the system works quite well ( read meat locker), have you checked and cleaned all of the return air filter screens that are behind the grills, once plugged they will greatly reduce the air flow...... :beergood:
The above is strictly my opinion always based on years of doing...remember to support local business , it pays back.

Canada
Viper
CYO Supporter
CYO Supporter
Posts: 5799
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 431 times
Been thanked: 1586 times

Re: Mariner 350 a/c upgrade

Postby Viper » October 12th, 2017, 10:55 am

Welcome aboard Bobby.
It may not be as simple as swapping out with a larger unit. As mentioned above, you may need to move more air. Check the specs on the larger unit first. Also, bigger isn't always better, there's a science to calculating the size of a unit for a given space so you don't have too small a unit running all the time and not doing anything, or too large a unit that will short cycle all the time. The space/volume to cool down/heat up, ambient temps, etc. need to be considered.

Why are you replacing it? Is it that it's simply not cooling enough? If so, there are things you should check first that affect performance before going through the expense of replacement/upgrading. Your particular conditions such as your location and whether you're in an open slip will also have a bearing on whether a bigger unit is required.
User avatar

United States of America
waybomb
CYO Moderator
CYO Moderator
Posts: 2404
Joined: February 5th, 2013, 9:24 pm
Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85
1996 Boston Whaler Rage 15
Location: Saint Joseph,Mi
Has thanked: 50 times
Been thanked: 396 times

Re: Mariner 350 a/c upgrade

Postby waybomb » October 12th, 2017, 12:38 pm

Another issue with bigger is that it will cool the air quicker, but because cooling is short cycling, it is not removing enough moisture. Thus you have a low temp but high humidity.

If you are going to replace, I'd start with a brand new unit of the same size, and then add a second smaller unit (5k btu?) in a convenient place, if in fact the original size was undersized.
Thanks
Fred
1969 Glaspar Avalon /1969 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
User avatar

United States of America
mjk1040
Admiral
Admiral
Posts: 1506
Joined: July 30th, 2015, 8:15 am
Vessel Info: 1998 355 AC/MY "Deja Vu"
Location: Savannah, NY
Has thanked: 9 times
Been thanked: 236 times

Re: Mariner 350 a/c upgrade

Postby mjk1040 » October 12th, 2017, 8:40 pm

Another thought, if you have checked all external areas for any blockage, condenser, filter, general air flow around unit and all is good, you may want to consider descaling the internal parts of the unit before replacement.
Mike :down:
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
User avatar

Canada
Midnightsun
CYO Supporter
CYO Supporter
Posts: 2831
Joined: March 27th, 2016, 2:27 pm
Vessel Info: The Midnight Sun
2007 41CMY
Volvo D6-370's
Location: Montreal, Canada
Has thanked: 253 times
Been thanked: 1093 times

Re: Mariner 350 a/c upgrade

Postby Midnightsun » October 13th, 2017, 4:29 am

I suggest you replace the unit with a newer more efficient unit. One thinks just fill the freon because it is low however things have improved considerably and they do produce much cooler air. The coil may be reaching it's lifespan and the blower motor also not to mention the electronics. You replace one thing and then another eventually goes. Been there done that.

The best option out there is a new MarinAire not to be confused with Marine Air. I replaced a 16,000 btu Marine Air with a 14,000 btu MarinAire in my previous 32' express. The difference was night and day. The new unit would freeze you out if you wished not to mention they use Toshiba compressors which are dead quiet. I kid you not, you can stare the unit in the face while it is on and wait for the click of the compressor relay and you still cannot tell it is running. Quiet a few over at BOC went this route and could not be happier with the results. I also plan on upgrading the Marine Air units on my Carver in the near future, especially the one under the bed which is noisy and produces some rather small but annoying vibration.

The quality of the unit is very apparent, stainless steel pan, insulated blower and compressor, built in diagnostic gauges and the list goes on.

If you need trouble shooting/assistance, they answer right away and know exactly what they are talking about. Here is a link to the 16,000 btu MarinAire unit and you will like the price. :beergood: http://www.marinaire.com/Marine-air-con ... ba16k2.htm
Cheers, Hans
2007 Carver 41 CMY
Twin Volvo D6-370's
Montreal, Canada
Midnight Sun I Photos
User avatar

Canada
feeez
Commander
Commander
Posts: 421
Joined: May 14th, 2014, 6:32 am
Vessel Info: 2001 350 Mariner
Location: Beacon Bay Penetanguishine Ontario
Has thanked: 52 times
Been thanked: 64 times

Re: Mariner 350 a/c upgrade

Postby feeez » October 13th, 2017, 11:34 am

waybomb wrote:Source of the post Another issue with bigger is that it will cool the air quicker, but because cooling is short cycling, it is not removing enough moisture. Thus you have a low temp but high humidity.

If you are going to replace, I'd start with a brand new unit of the same size, and then add a second smaller unit (5k btu?) in a convenient place, if in fact the original size was undersized.



+1 on this. A friend of mine updscaled his boat to a bigger unit and ended up with cold... wet air. not very nice at all.

Fraser
Former 2001 350 Mariner owner

Return to “AC/Heat, Plumbing & Sanitation”



Who is online

Users browsing this forum: No registered users and 15 guests