Hello all!
Im new here and a new Carver owner.
I need to replace all safety rails on my 1981 3007.
Im wondering if anyone has a specification diagram and measurements.

Im also replacing the rub rail. Looking at the Taco Flex vinyl. Any advice on this is appreciated.

Hello friends!

The two deck lights on either side of the sliding glass door are inop. They needed replacing anyway so I upgraded the fixture but there is no power. Does anyone know where the switch is to turn them on? I’ve tried every switch on the boat!

Also, at the helm, below the transmission shifts, sits a white and chrome round knob, like a dimmer switch. It doesn’t look factory to me and I have no clue what it was used for (the knob is fused and won’t rotate). I’ll dig into it this weekend but any clues?

Thanks!!

I have a 1991 3608 Aft Cabin with twin 454 crusaders. I have upper and lower helm stations and would like to lubricate the both the throttle and transmission cables. I am trying to understand the best method and any specialty tools that may be required. Thanks.

Tomorrow going to view a 2007 Voyager 52 Volvo D-9s. 2500 hours. records for the last 5 years. New turbos in 2023. Boat has been in charter for at least last 3 years. Aftercoolers and heat exchangers serviced June 2025.
I'm used to Cummins 6CTA8.3 and some what suspicious of Volvo. I m in Seattle so is boat.
Any comments on reliability of D-9s , maintenance and repair issues, ?
Recommendations for a really good Volvo Mechanic/engineer in this area?

Thanks for any Help whatsoever,
Jim Miller

I'm not even sure what to call this piece, but it's a painted aluminum insert through which the engine room blowers take suction. The clips visible on the side hold a vinyl pad which I've removed. I can't see any mounting hardware that attaches this to the fiberglass hull. Has anyone ever seen these removed? Desperately needs recoating and I'd like to remove them and do it if possible.

Good Day All,

Reaching out to the community for help in sourcing a st'bd side replacement muffler for our 1997 320 Voyager.

The original muffler was manufactured by Naqualift. This is a four inch, two in, one out horizontal setup. Engines are Crusader 350XL's.
Have reached out to Great Lakes Skipper, Marine Parts Source as well as other distributor's. They are unable to cross reference this it seems.
The Carver part number is 5111701. Any help or advice on where to head next would be greatly appreciated.
Thanks in advance for all replies.
cheers, Capt Happy

Hello everyone! I’m new to the forum. Nice to e-meet you all!

I own a 1995 carver aft cabin. I was using appliances on the port side and I believe I tripped the breaker. I went outside and made sure the shore power was working, turned switches off and on. On the panel, I only have a Shore #1 breaker which works supplying power to the starboard side (volts), however, the amps go slightly up for the port side and go back to 0.
GFCI outlets can’t be reset for port side but starboard side ones work fine. I unplugged everything, reset shore power and I’m having no luck. Does anyone know if there is an AC breaker hidden somewhere? I checked cabinets and all. Even under the stairs I see only battery switches. Please help if anyone knows this model well - owners manual is no help at all.

2025 My Season By The Numbers

2025 was a good year. I traded in my 22 Stingray 182 SC for a 23 Sun Tracker Party Barge 22 DLX pontoon demo boat with a 115 HP Mercury Pro XS outboard at the Detroit Boat Show in February. Price was right. I never saw myself as a pontoon boat owner until my Son purchased one in 2019 and I found I liked the stability a pontoon boat has along with the room to move around.

I did most of my boating on the Detroit River, Lake Erie and Lake St. Clair. I did trailer up to northern Michigan and I launched on Lake Superior, Higgins Lake, Houghton Lake, Elk Lake, Lake Skegemog and South Lake Leelanau. That’s one of the reasons I trailer my boat. Can go anywhere and launch.

I think I can say I had a pretty good season overall.
The numbers:

23 Launches

5 Day trips to Put-in-Bay Ohio

70.0 Hours on the engine

803.7 Miles travelled

209.964 Gallons of rec fuel used

3.82 MPG

2.99 GPH

$874.00 Dollars cost of rec fuel

$900.00 Boat storage fee Gibraltar Storage

$476.99 Garmin ECHOMAP UHD2 53CV+TRANSDUCER

$904.18 Mount 3rd cleat starboard mount Garmin GPS/Sonar

$125.25 Put on MC#’s and boat name

$33.39 Pkg. of 4 rail mount fender holders

$36.72 2 rail mount flag poles and American flags

$84.75 Amazon for plow style stainless steel anchor

$198.68 Quicksilver Spare propeller

$232.14 Mercury propeller to replace damaged propeller

$202.44 Replace unrepairable trailer tire

$374.51 Replace broken trailer tail lights

$67.83 Starbrite canvas waterproofing

$146.61 New battery (left master control switch on)

$13.76 Bought spare set of keys for boat

$1139.71 Winterize engine grease hubs shrinkwrap boat

$5810.96 monies spent on boating. Worth every penny. Some of the expenses are one time expenses and shouldn’t be repeated.

Hello! We have a 1993 Carver 440 aft cabin twin Cat 3116 engines that we are planning on cruising the Bahamas with. Has anyone taken their 440 down south as far as Puerto Rico?

I have a fuel smell in the cabin of my carver 355. It is in the cabin only, there is no fuel smell in the engine compartment. The fuel tanks and fuel lines are good not leaking. Looking to see if anyone else has had this problem and what the fix was.