Hello Everyone,



I have a 2004 Carver 360 Sports Sedan -



I had divers cleaning the bottom of the Vessel and they said I needed a Bracket Replaced Near Trim Tab / Rudder



I have no idea what this part is called nor can I find it online. Does anyone have anyone had to replace these brackets and what are they called? Where can I get them or is it even possible.

See pic attached.



Any help or suggested are appreciated.



Caption Larry

I get an alarm from the electric shift throttle unit when powering up the bridge electronics. The alarm can be silenced by pressing the "select" button on the throttle mount but the LEDs for FWD, Neutral and REV continue to flash. The shift & throttles work but this is clearly not normal operation. Has anyone else experienced this?

It seems from my Google search that this may be a communication issue that can be related to the powering up sequence?

I've tried cycling the switches on the servo ...

I have a 2004 396 with twin Crusader 8.1 mpi's. I think this would apply to other twin 8.1 boats as well. I'm starting the replacement of the dual tube oil coolers. The port engine has the cooler on the inboard side which makes this an annoying but possible job. The starboard engine has the cooler in the same position on the engine which means it's on the outboard side. (Thanks, Crusader) This makes the access somewhere between life-threatening and impossible. Has anyone successfully replaced th ...

Hello
I just purchased a new to me 1989 3807 that will need new flooring and furniture.
I am trying to get a jump on the project and buy supplies before going to the boat to measure it out.
that being said do anyone have mesurments for the inside of a 3807? any help greatly appreciated.
Thank You

Hello
I just purchased a new to me 3807 that will need new flooring and furniture.
I am trying to get a jump on the project and buy supplies before going to the boat to measure it out.
that being said do anyone have mesurments for the inside of a 3807? any help greatly appreciated.
Thank You

Purchasing a 2003 360SS in the next month, boat is in Quebec and being driven down Lake Champlain to it's home north of Burlington.

Very interested in all of the projects on here! I spent the last 6 years with a Cruisers 3375 and did an INSANE amount of work to it, actually looking forward to doing it all over again!

Punch List:
Garmin GPSMap 4208 replacement (thinking Raymarine Axiom 12+)
Raymarine ST60 (ITC-5 to NMEA)
Saw a project on here that converted the TV insert in galley into a swing up sto ...

Good Evening,

Anybody selling a Freshwater C43? Preferably in/around the Great Lakes area.

Thanks so much.

I have a 1977 carver mariner 28 foot and my fresh water tank leaks. can it be repaired or is there a pac to purchase one, or is there a used on available?

Graham

Ahoy All! It's been awhile!
I have lost AC Power to the wet bar area outdoor "weather proof" outlet on the port side, which also supplies AC power to the outlet inside the wet bar to run the ice maker. The GFI on the port side over the couch is good and seems to be working as it should, as we have AC power on the port side in the aft cabin. I took the weather proof outlet apart only to find that it was totally shot inside so I replaced it. Figured that was my no power issue, not! Long time local ...

Hi

Given that Carver is out of business, does anyone know where to get a replacement door for the Starboard transom door - where the cutoff switches/shore cable is housed.

Mine blew open in a storm and broke in half.

Many thanks in advance