Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
- Global announcements
- Latest Posts
View the latest post Handling qualities of the 325/326 short aft cabin models
- Posted by: BigTex68 » April 2nd, 2024, 8:52 pm
- Forum: Carver Yachts Forum - Model Discussion
Considering a 2000 326. Have read some less-than-flattering reports about it being top-heavy and unstable. I've read reports of considerable bobbing motions, even at dock/anchor. I realize these boats are floating condos, but is the stability really this bad? Carver sure seems to have sold many of this design over the years for the handling to be so terrible.
Views: 555 • Comments: 1 • Write comments
View the latest post WANTED: Carver C40 Command Bridge
- Posted by: SteveMyhre » March 28th, 2024, 10:01 am
- Forum: Carver Boats For Sale
Looking for Carver C40 Command Bridge. Prefer low hours, hard top, laminate flooring but open to others.
Views: 667 • Comments: 0 • Write comments
View the latest post Balsa wood core areas of 1977 Santa Cruz 2566
- Posted by: palfvin » March 26th, 2024, 4:34 pm
- Forum: Carver Yachts Forum - Model Discussion
I'm looking to install Hull Shield on our boat to discourage marine growth. It only works, however, if the associated transducers are mounted directly against the hull below the waterline with no intervening insulation or sound absorbing material.
If necessary, I can mount them on the outside of the transom, but I'd prefer to mount them on the inside of the hull if possible.
The owner's manual says that balsa wood was added to the hull on the "planing surface" and to the hull sides "where necessary". I'm wondering if anyone knows what this translated to and, specifically, where I might find a couple of spots roughly three inches in diameter which meet the above criteria.
I will do my best to determine if such spots exist through inspection, but I'm hoping someone in this group might already know the answer.
Views: 533 • Comments: 2 • Write comments [ Read all ]
View the latest post Pan Gasket Change 4207 Aft Cabin Cat Engine
- Posted by: Playmore » March 26th, 2024, 2:02 pm
- Forum: General Boating Discussion
My Cat 3208 Engine pan gasket started leaking. Has anyone had to change this gasket. If so were you able to do so without removing / raising engine.
Views: 409 • Comments: 0 • Write comments
View the latest post Wanted - Carver 504
- Posted by: dfullert » March 25th, 2024, 6:14 pm
- Forum: Carver Boats For Sale
Looking for a clean, low hours 504.
Views: 341 • Comments: 0 • Write comments
View the latest post Attachment(s) 2024 launch season ???
- Posted by: Cooler » March 25th, 2024, 12:19 pm
- Forum: Boating & Cruising Lifesyle
Here we are again! Getting closer to launch season in the north. Looks like about 51 days for me. Will not need to worry about any rogue ice chunks this year. Have not had any ice, even shore ice, for at least the past month. Latest weather forcasts point to above normal temps for our area all Spring. How long before y'all launch? er
Views: 1029 • Comments: 13 • Write comments
View the latest post Flax packing size for 3207
- Posted by: Dad Joke » March 25th, 2024, 6:45 am
- Forum: Carver Yachts Forum - Model Discussion
I'm replacing the packing on the rudder seals on my 3207. The shafts and stuffing boxes are the same size as the prop shafts. What size packing do I need? I thought it was 1/4", but that seems to be too thick.
Thanks,
Views: 409 • Comments: 2 • Write comments
View the latest post Help with Engine Serial numbers
- Posted by: AC3207 » March 23rd, 2024, 2:56 pm
- Forum: Gas Engines/Transmissions
Want to purchase tune up parts such as filters and impellers for my recently purchased 1986 AC 3207. Im having trouble nailing down what engines I have based on the serial numbers. I cant seem to find these serial number ranges when I go to websites that sale parts etc. Any help on id'ing the engines and a good place to purchase parts would be welcome. Thanks.
SERIAL NUMBERS:
Port: A483163
Starboard: A492900
Views: 666 • Comments: 9 • Write comments
View the latest post Voyager 450 Convection Microwave Removal
- Posted by: Rams » March 22nd, 2024, 1:21 pm
- Forum: General Repairs & Maintenance
I have a 2001 Voyager 450. Does anyone know how to remove the original convection microwave? It does not simply pull out and I can’t see any obvious screws….would really appreciate some guidance….thanks
Views: 447 • Comments: 5 • Write comments
View the latest post Attachment(s) Cummins 6BTA losing coolant
- Posted by: KyleR » March 21st, 2024, 8:36 pm
- Forum: Diesel Engines/Transmissions
I know this is a long read, but I was hoping to give as much info as I could. Thanks to those who make it through!!
About 3 mornings ago as I was performing my pre-run checks, I noticed the coolant overflow reservoir on my STBD main engine (SN:46174828) was empty. I checked the main reservoir and it was completely filled. So I started looking for external leaks but could find no evidence of an external leak anywhere.
I turned to looking for internal leaks and checked the oil and transmission fluid but neither had any abnormal level or visual indication of contamination. At this point I was thinking I probably had a heat exchanger leak and was slowly losing coolant to the seawater side via a tube/sheet leak. So I refilled the overflow reservoir, warmed the engines then started our cruise at 1050rpm @ 7knots, our typical cruising speed.
Within 10 minutes, the STBD engine started producing thick white smoke from the exhaust – and a lot of it. I went and verified the coolant overflow reservoir level and I could definitely see that the level had lowered. Typically I see level go up an inch or so, but it had dropped about a quarter inch. Given the lowering level and thick white smoke, the heat exchanger leak seemed less likely. During all of this, temperatures were normal at the helm indications (165F) as well as temps taken locally on the engine with an IR gun. I was comparing them to the PORT engine and both were as matched as they ever are (within a couple of degrees).
We continued to slowly make our way and I kept checking the overflow reservoir every 5-10 minutes and could definitely see a lowering trend, but nothing drastic. The white smoke sometimes got a little less, and sometimes would get worse. Finally, I saw the helm temperature start to rise pretty rapidly and I turned off the engine immediately as the temp was passing 200F, but it continued to rise to around 220F before stopping. No alarms were ever received.
After putting the other engine in neutral, I went down and saw that there was still coolant in the overflow reservoir, but it was lowering pretty fast as it was being drawn into the main reservoir – and it was empty within just a few minutes. I didn’t want to open/check the main reservoir at that point as everything was pretty hot. We finished our trip on the PORT engine and once the STBD engine cooled I checked the main reservoir and it was completely empty.
My research of the symptoms seems to suggest a potential coolant to exhaust manifold leak and based on my research I thought I would go after the two most obvious locations first: the exhaust manifold cap gasket and then the turbo charger to exhaust manifold gasket.
I am attaching pics of the exhaust manifold cap after removal – before doing any cleaning other than wiping off the gasket. You can see what looks to be a loose sealing surface on the gasket hanging down in the pic with my hand, but there was no evidence of external leakage from the cap so I am not sure if that tear was the result of removing the gasket or a potential failure mechanism.
Also I definitely found what appears to be residual coolant in the exhaust manifold. (I stuck a paper towel inside and it came back soaked with a yellowish liquid which is the color of the coolant I use (Valvoline Zerex G05). It didn’t fill the manifold, just some traces of it that I was able to see.
I haven’t removed the turbo from the exhaust manifold yet. I basically wanted to attack this one step at a time so I started with the cap gasket replacement (the easiest) to see if that works. If not, I will proceed to the turbo to manifold gasket and replace it and see if that works. If not, then I am guessing I will have to remove the manifold and have it inspected/tested. And the final attempt would be a head gasket replacement if all else fails. Basically after each step, I'll pressure test the coolant system and see if it holds.
My questions so far that I would like help with are:
• Given my symptoms and indications, am I on the right track?
• Does my work progression (1. cap gasket, 2. turbo gasket, 3. manifold removal, 4. head gasket) seem reasonable?
• Is there anything specific I should be looking at to confirm the source of the leak or which component likely failed? Nothing jumps out at me on the manifold exhaust cap and gasket, but maybe the pics reveal something to more experienced eyes.
Thanks for reading and any feedback is greatly appreciated!
Kyle
Views: 779 • Comments: 7 • Write comments [ Read all ]
-
- Topics
- Posts
- Last post
-
-
Introduce Yourself!Are you a new member? Stop in and say hi!
- 1130 Topics
- 8827 Posts
-
Last post
Dampner Plate
by glenn4713 View the latest post
May 2nd, 2024, 10:15 am
-
-
- 768 Topics
- 6406 Posts
-
Last post
Re: Volvo engine exhaust elbo…
by bud37 View the latest post
May 2nd, 2024, 11:09 am
-
-
Carver Yachts Forum - Model DiscussionThe is the forum to discuss general information regarding all Carver Yachts.
- 811 Topics
- 5567 Posts
-
Last post
Re: 530 Voyager
by rochelle1974 View the latest post
April 28th, 2024, 7:05 pm
-
-
-
Boating & Cruising LifesyleChat with fellow Carver owners about cruising destinations and more. Plan rendezvous, raft ups & get together's here.
- 152 Topics
- 1837 Posts
-
Last post
Re: 2024 launch season ???
by Cooler View the latest post
May 2nd, 2024, 11:17 am
-
-
- Topics
- Posts
- Last post
-
- 419 Topics
- 3869 Posts
-
Last post
Re: Carver Soft Goods
by JimN View the latest post
April 30th, 2024, 6:37 pm
-
-
General Repairs & MaintenanceAnything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
- 1681 Topics
- 12085 Posts
-
Last post
Re: Carver 396 Shifter/gear s…
by KyleR View the latest post
May 1st, 2024, 10:18 pm
-
-
-
Gas Engines/TransmissionsGAS engine, transmission and generator repair and maintenance discussion forum.
- 580 Topics
- 5942 Posts
-
Last post
Re: Carver 350 aft cabin 1994…
by Viper View the latest post
April 29th, 2024, 8:16 pm
-
-
-
Diesel Engines/TransmissionsDIESEL engine, transmission and generator repair and maintenance discussion forum.
- 163 Topics
- 1081 Posts
-
Last post
Loss of power
by TruckerTim View the latest post
April 29th, 2024, 2:18 pm
-
-
-
Electronics & NavigationDiscussion of radars, GPS, autopilots, stereos and TV's. Also iPad and other mobile navigation devices.
- 232 Topics
- 1586 Posts
-
Last post
Re: Autopilot
by Pura Vida View the latest post
April 26th, 2024, 5:31 am
-
-
-
AC/Heat, Plumbing & SanitationDiscussion of AC's, plumbing and sanitation related issues.
- 467 Topics
- 3996 Posts
-
Last post
Re: AC Water Manifold Project
by tomschauer View the latest post
April 28th, 2024, 11:05 pm
-
-
-
ElectricalDiscussion of batteries, chargers, wiring, generators, distribution panels, battery switches, etc.
- 521 Topics
- 5275 Posts
-
Last post
Re: Gen Runs but Not creating…
by KyleR View the latest post
May 1st, 2024, 8:56 am
-
-
- Topics
- Posts
- Last post
-
-
Carver Boats For SaleList your Carver Yacht for sale here. All listings are free for active form members! ALL ADS ARE FREE - USERS MUST HAVE AT LEAST 10 POSTS TO PLACE AN AD
- 107 Topics
- 336 Posts
-
Last post
WANTED: Carver C40 Command B…
by SteveMyhre View the latest post
March 28th, 2024, 10:01 am
-
-
-
Boat Parts For SaleUsed boat parts, used Carver boat parts, trailers, dinghies, outboards, props...everything but the boats they were attached to. ALL ADS ARE FREE - USERS MUST HAVE AT LEAST 10 POSTS TO PLACE AN AD
- 244 Topics
- 973 Posts
-
Last post
Custom Carver Boat Mattress, …
by pbeelien View the latest post
April 19th, 2024, 11:41 am
-
- Newest members
- Username Joined
BoatBoy 30 Apr
Shofheinz 29 Apr
ibdcatt@aol.com 29 Apr
SuiteMelissa 28 Apr
JackRed 27 Apr
SpringLakeCarver 27 Apr
miko34 26 Apr
RunninReilleys 26 Apr
- Statistics
- Totals
Total posts 62926
Total topics 7483
Total Announcements: 0
Total Stickies: 4
Total Attachments: 5858
Topics per day: 2
Posts per day: 15
Users per day: 3
Topics per user: 1
Posts per user: 6
Posts per topic: 8
Total members 10351
Our newest member BoatBoy
- Birthdays
- No birthdays today
In the next 30 days
No members have a birthday within this period of time.
- Sponsors