Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
- Global announcements
- Latest Posts
Filled potable water tank for first time this season after spring launch and the water is ending up in the fore and aft bilge. Is there a valve that I am neglecting that may have been opened or closed during last winterization? 1986 3607
Views: 26 • Comments: 4 • Write comments
View the latest post Attachment(s) 2000 396MY icemaker removal
Icemaker stopped making Ice it is a Raritan and working with tech support I now need to remove icemaker from cabinet to continue service diagnostics. I cannot figure out how to remove the unit. It looks like screwed to ss frame. I think they built the boat around the icemaker.
When opening the small round access port forward of the unit I see screws but cannot get to them. Any help would be greatly appreciated.
Views: 61 • Comments: 8 • Write comments
I have twin ZF280A transmissions mounted to twin Volvo TAMD 480P’s. The port engine has developed a 5-7 second delay in the detent position going in fwd or reverse, past the detent response is immediate pulled the screen on the from the aft end all was clean, oil only has 50 hours on it and maintained proper level since changing. Anyone have any ideas. This is a 2001 Carver 466. Thanks for any ideas!
Views: 45 • Comments: 2 • Write comments
View the latest post Attachment(s) 2005 Marner Stern Access Doors
Last week I was in a hurry to get to a bridge opening and unfortunately left the dock whist still plugged in. I broke the starboard access door to the power hookup. UGH!
The door is made out of Carver 'white' lucite. (we know it's an off-white)
I visited two businesses today and one can manufacture a unit in standard white. The second offered the same service with an additional option of a 'seafoam starboard', which leaned beige. The latter material does not have a 'shiny' surface and will not match the finish of the fiberglass.
I am thinking that if I can find a source for the lucite, I would purchase it and then bring it to the business to fabricate.
As we well know, I cannot contact the Carver folks for information on the source for part and am wondering if anyone on the site has been in a similar situation and how you went about the fix.
Views: 71 • Comments: 3 • Write comments
I'm having an issue with power to my aft cabin head macerator and waste tank level display. I'm thinking they are both on the same circuit, as they both cut out at the same time. Additional to the breaker in the power control box, is there anywhere else to check? I don't recall Carver using fuses, after the breakers.
Views: 47 • Comments: 2 • Write comments
View the latest post Attachment(s) What is it?
We had a Sealand 8600 with Bidet toilet in our aft cabin head. While tightening the connections we snapped the plastic check valves. This head is a discontinued model! We looked into getting replacement parts and decided to purchase a new head. Yesterday, we were at the boat and taking measurements, adding some shut off valves and other things. We have always known that this part was in the boat and thought it was a part of the head. Taking a closer look at it, we have no idea what it is or what purpose it serves, so before we haul it out, we thought we would ask here. It is attached to the water lines. Has an input line but no output. There are no identifying marks on it anywhere. Sorry the photos are all rotated 90 degrees clockwise. This is on a 3607.
Views: 178 • Comments: 14 • Write comments
Had a loose fitting on my bridge hydraulic steering system of my 2001 3565 which caused fluid to leak down onto the vinyl interior salon headliner. Bummer! Does anyone know what manufacturer/color the vinyl is in this photo to save me lots of time trying to find something that might be a match? Any help pointing me in the right direction would be greatly appreciated!
Views: 69 • Comments: 3 • Write comments
- Last post
- Last post
- Last post
Boat Parts For SaleUsed boat parts, used Carver boat parts, trailers, dinghies, outboards, props...everything but the boats they were attached to. ALL ADS ARE FREE - USERS MUST HAVE AT LEAST 10 POSTS TO PLACE AN ADTopics: 206
- 206 Topics
- 834 Posts
Prop's off 466 Carver
by 466 carver View the latest post
June 26th, 2022, 11:30 pm
Total posts 53692
Total topics 6331
Total Announcements: 0
Total Stickies: 4
Total Attachments: 4528
Topics per day: 2
Posts per day: 16
Users per day: 3
Topics per user: 1
Posts per user: 6
Posts per topic: 8
Total members 8885
Our newest member adubois21
- No birthdays today
In the next 30 days
No members have a birthday within this period of time.