. . . or something like that. I'm replacing my rudder ports. I need to ensure that the packing nut and jam nut do
not seize to each other and to the port, becoming one big useless lump, as they had previously. Should I apply
dielectric grease to the threads and contact surfaces between the nuts? Anti-seize? Basic bearing grease?
Also, I plan to slack the locking nut and re-grease periodically going forward. How often? Monthly? Annually?
Thanks.

I will be in FT Lauderdale early afternoon, on March 2. Anyone willing to show me their Carver and chit chat about boats? er

Hi all,

I have a 1988 Carver 3607 aft cabin and I am in need of 3 regular stanchions and also the starboard forward boarding stanchion. Anyone have any or know where to source them? Thanks.

Steve

Pulling all the windows on our 1994 Carver 390 - looking for someone experienced in the same before we take this on- thanx, in advance! dc

As we're preparing to cross to the Bahamas in a month or so, I have heard some real crazy stories of people paying as much as $135 for a blackwater tank pumpout - and on boats with smaller holding tanks than ours! It seems pumpout locations have become few-and-far-between, and quite expensive if you're in some areas.

Unfortunately we do not have the installed option to pump directly overboard and I don't really have the time to add an overboard discharge system in the time frame I'm working with.

As such, I started looking around and ran across the following:

https://www.blackwaterbazooka.com/

Seems like an interesting concept in that you can just connect it to your pumpout fitting, drop the discharge hose overboard, hookup electricity and start pumping. (Yes, I'm aware of the 3-mile rule and no discharge zones - this based on the assumption that I'm in an area where overboard discharge is allowed.)

Anyone ever use anything like this or have any other suggestions? My initial concerns are:

1. The discharge hose looks a little small in this particular design, however the pump does macerate so maybe that's not a big deal?

2. It says the pump generates 5ft of suction head, but with the blackwater tanks in the bilge and the pumpout connection on the topside deck, I'm not sure if this will generate the lift necessary to adequately pump out the tank. Thoughts?

If anyone has any other suggestions I'm all ears! Thanks in advance!!

Kyle

So I'm wanting to add an inverter/charger and some monitoring capability (as well as a dedicated house bank) to my 1996 455. I think I finally have a grasp on how I want the future system to look, but my problem now is I can't find ANYTHING with any details about how the original electrical system was wired. In the owner's manual for both DC and AC Systems there's a schematics page... But it's blank and says "Not available at time of printing" which is less than helpful. Anybody know where I can find one, or who can at least help me understand where the shore power goes between the inlet on the stern and the breaker panel?

Howdy folks, looking for some advice on the following situation: I "inherited" a boat from my uncle....he's not able to enjoying the boating life anymore due to terminal illness and has asked me to sell his boat of him. I'm not a boat savvy so just looking for a ballpark price for what his boat might be worth so I can recognize a decent price when someone offers. Here's what I know about it: 1987 Carver 32', hour meter shows 1272. Gas burner with dual engines and a separate generator. Ran up an down the river with in fall of 23, then we had it winterized by a marine service company who replaced the batteries, replaced all spark plugs, got the generator running again and just a general tune-up (a little over $2k worth of service). I've attached a few pics of it, much appreciation for advice/value!

Good evening all,
I'm the brand new owner of a 1985 3207 aft cabin. I have no clue what I have gotten myself into! I have dozens of questions, but I'll look in the existing threads before I ask something that has already been answered.

I do have a quick question - The boat is in Louisville KY. I'm at Lake of the Ozarks MO. I think the width is 11' 7" and the weight 12,000#. To get a transportation quote I'll need the height. We can remove the bimini, so the height to the top of the fly bridge to the lowest point. I guess we will remove the props and rudders.
Also and recommendations or warnings?

Thanks
Gaynor Blake
1985 3207 AC

Well, I did it. Put an offer on a Carver Voyager 530 and it was accepted. I'm looking for a surveyor who is up on the Voyager model line. Prefer in the mid-west but can be any location if they are willing to travel.

I did a pretty good inspection but didn't test anything yet as the boat is up dry, and no power to anything.

Hello we, my girlfriend and i, was just given a Carver 3396 Mariner 1981 model with two Volvo 155hp located in the Canary islands. It has been used by an elderly man as winter "residence" getting away from the cold in Norway.
We already have a house in the northend of the island with a hobby workshop so i am well equipped to take on this task i hope It is a big project i think, a lightning strike killed the batteries 4 years ago and due to his age (88) he did not bother replacing it so the engines have not been started since. Due to the lightning strike all the electrical need checking of course, and the toilet is out of order...
Well, the plan is to use it as he has at first, as a "cabin" down south on the island starting out with fixing the looks like polishing/paint and appliances etc. replacing all textiles and so on, and then start fixing the technical bit by bit as we go along. I hope to find inspiration here and hopefully get some help when i need advice