Good day all.
We need to replace both the refrigerator and icemaker on our Aft deck of our 3807.
Does anyone have dimensions and model replacements for both? Also need to know if I could find these items at an RV supply store.

Hi there and so I'm new and still investigating this boat, and may have a really STUPID question...I've just discovered that port is replaced and approx. 7 years newer than starboard. Starboard appears original and has a Rochester quadra-jet setup with spark arrestor. Port has a LARGE Holley double pumper and just a cleaner. The stupid question...this is not normal is it? I'm under the assumption that the setups should be identical. That stated, the engines perform differently and planing is difficult; synchronization is almost impossible. I thought the linkage needed adjusted. Am I on track in thinking I need to replace the port carb? If so, any thoughts/advice on the best setup? The stock(starboard Q-jet idles better and sounds better but doesn't have great response. Port is pretty jumpy and runs a little hotter(160). Advice? I'd like to get out and run, but don't feel safe. Thanks.

Hi folks! I'm jumping back into the water after a 15 year hiatus....still going over the new-to-me Santego and heading to the repair forum but just wanted to say Cheers...we boat from Erie, PA and will be enjoying it as much as we can! New to forums and considering myself new-to-the-water so am being quite diligent and careful. Hoping to be moving up within a few years but already know we'll be Carver faithful!

I applied for a NEXUS card on May 23rd. Does anyone here know how long the process usually takes? Just curious as my passport expires on August 16th and I am not planning to renew it.

Hello new guy here. Working a deal on what I believe is a 1979 Carver 3326 with twin 270 Crusaders. Hour meter shows 475 hours. She is currently on a trailer and has been there for at least 8 years. It is actually in pretty good shape. I have questions about where to find the HIN and what transmissions came with the 270 Crusader. I wouldn't mind any tips of things that I need to be looking at problem wise.

Thanks,

Todd

I have a 2003 366 with twin Mercruiser 6.2s rated at 5000 rpm. However, the rpms top out at 4000 with the original 22 x 21 4 blade props. My mechanic suggests I change to a lower pitch and one prop company says I should use 22 x 16 in order to reach 5000 rpm. That's quite a change from the OEMs.

Does anyone have any opinions about this? The prop company would like to know the typical speed of the 366 with these engines running at 5000 rpm. Does anyone know the answer?

Thanks

Recently bought a 2004 420 Mariner and want to upgrade the Panasonic TV. How do I get it out?

I've got 2 live wells in the bow. I'll never use them as live wells so I want to open the drains but they are plugged. I cannot figure out how to unseat the plugs. Any ideas? thanks!

You can call Carver Yachts, parts with your hull # , explain the part to Pat and see what they have, maybe they can give you a part number for whoever made it in the first place. Actually on the Carver Yachts website, under owners is a drop down box with some choices, manuals ,parts and such......just follow thru with your year and model and pick thru it....lots of info...I just did the same for my windshield screw covers that had shrunk like crazy........

just purchased Carver 430. Question...where is the breaker for the refrigerator? I do not find one for it on the electrical panel. Thanks