Page 1 of 1
Raymarine E127 Question
Posted: October 14th, 2014, 12:44 pm
by mikeK
I recently purchased a Raymarine E127 chart plotter. Unfortunately it doesn't contain a port to connect a remote buzzer or alarm speaker so I can hear the anchor drift alarm or radar proximity alarm when I'm in the aft berth sleeping.
Has anybody figured out a "work around" for this?
Re: Raymarine E127 Question
Posted: October 14th, 2014, 1:53 pm
by Lyndon670
Easiest solution is Anchor Watch HD - download it and install it on your smartphone. Then sleep well.
Re: Raymarine E127 Question
Posted: May 15th, 2015, 9:40 am
by Hugo
I'm not sure what you mean by port...
There should be an output wire coming from the e127 that you can wire to a low current draw buzzer. If you want to power a high current buzzer you will need to wire a relay. Look at the wiring documentation for the unit...
Good Luck