Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Holding tank

Discussion of AC's, plumbing and sanitation related issues.
User avatar

United States of America
John Easley
Scurvy Dog
Scurvy Dog
Posts: 40
Joined: June 4th, 2016, 7:21 am
Vessel Info: Sold a 1986 42' Chris Craft Catalina. Looking for a 1999-2006 530 Voyager Pilothouse.
Location: Lakeland, FL
Has thanked: 5 times
Been thanked: 8 times

Re: Holding tank

Postby John Easley » July 11th, 2017, 1:59 pm

Roxanne, the situation you describe sounds similar to what we experienced. You could see matter intermittently flowing through the suction hose but it wasn't a steady flow. Boats in the south are particular prone to small critters like mud daubers making a nest in the vent and restricting the flow. A local marine mechanic can probably show you where that vent hose is. Remove it and blow it out with air. If it's already clear, then what Viper described is something you should investigate... and that turned out to be our problem. We have an electric overboard waste pump system connected to our holding tank and that system has a vent, too. That vent was allowing in more air than the suction system was expecting. We fixed it by installing a valve inline before the overboard discharge pump and closing the valve. Now the suction pump makes quick work of it.

User avatar

United States of America
Solana
Scurvy Dog
Scurvy Dog
Posts: 24
Joined: March 12th, 2014, 11:31 pm
Vessel Info: 38' Carver Santego - Complete refit 2016/2017
Location: San Diego, CA
Has thanked: 4 times
Been thanked: 4 times
Contact:

Re: Holding tank

Postby Solana » September 13th, 2017, 3:24 am

Good info - ours usually emits that horrible smell with the first flush after we've been gone for the week. Maybe were aren't letting enough water flush out before we leave.
User avatar

United States of America
Wsullivan71
Scurvy Dog
Scurvy Dog
Posts: 46
Joined: February 20th, 2019, 5:35 pm
Vessel Info: 2001 Carver 404 Motor Yacht
Location: Marco Island, Fl
Been thanked: 11 times

Re: Holding tank

Postby Wsullivan71 » May 14th, 2019, 3:47 pm

Another trick we learned from RVing is to dump a load of ice into the toilet and flush it into the holding tank. Take the boat out for a ride and the ice will break up any solids and eventually melt. Then pump it out as normal.
User avatar

Canada
Midnightsun
CYO Supporter
CYO Supporter
Posts: 2831
Joined: March 27th, 2016, 2:27 pm
Vessel Info: The Midnight Sun
2007 41CMY
Volvo D6-370's
Location: Montreal, Canada
Has thanked: 253 times
Been thanked: 1093 times

Re: Holding tank

Postby Midnightsun » May 14th, 2019, 5:47 pm

Wsullivan71 wrote:Source of the post Another trick we learned from RVing is to dump a load of ice into the toilet and flush it into the holding tank. Take the boat out for a ride and the ice will break up any solids and eventually melt. Then pump it out as normal.


Somebody needs to explain this to me as this "trick" is not new and have heard about it dozens of times, problem is there is no way in hell this will do anything at all IMHO. If you dump ice into the holding tank in the summer which we will say is 75-80 F and by the time you untie and motor out of the marina to start trying to slosh this around I would have to assume there is no ice left! If someone has a secret on keeping ice cubes from melting in warm sewage please tell me as I really do not understand. :captain:
Cheers, Hans
2007 Carver 41 CMY
Twin Volvo D6-370's
Montreal, Canada
Midnight Sun I Photos

Canada
Viper
CYO Supporter
CYO Supporter
Posts: 5799
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 431 times
Been thanked: 1586 times

Re: Holding tank

Postby Viper » May 15th, 2019, 7:31 am

Was easier to do years ago when most tanks had clean-out ports. We'd pump out then fill the tank to 2/3 with water and head out. Once in an area we can throttle up, we'd remove the access cover and pour in a few bags of ice. Once there's a few bags in there, the water is cold enough to to keep the ice from melting too fast. Take the boat for a spin and go over your own wake several times and you're done. Head back in and wait a couple of hours just to ensure all the ice is melted then pump out. Did a great job.

If there is no access, it's difficult to get that much ice in there. And you can't flush ice down the toilet either in an electric or Vacuflush or you're going to break something, I wouldn't recommend it. Vacuflush systems have a sensor pack on top of the tank that can be removed and would provide a means to dump a lot of ice in there but you run the risk of damaging the sensor array with all that ice banging up against it.

The best thing to do to keep the tank relatively clean is pump out often and use a product that will break down the solids. Some products use a lot of chemicals to accomplish this while others use a more natural approach with digestive enzymes. I've gone the enzyme route for a few years now and am happy with the results. There's a few brands producing these types of products now.

Canada
Viper
CYO Supporter
CYO Supporter
Posts: 5799
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 431 times
Been thanked: 1586 times

Re: Holding tank

Postby Viper » May 24th, 2019, 6:53 am

I should add that some marinas are pulling the chemical based treatments off their shelves. The reasons are two fold; the chemicals can't be good for the environment and eventually end up in our ground water, they're also not very good for the septic systems most marinas are on. Apparently enzyme based products have very little impact on the environment and promote septic system health which is beneficial for the marina, so it's smart for them to manage what goes into their septic systems.

Return to “AC/Heat, Plumbing & Sanitation”



Who is online

Users browsing this forum: No registered users and 37 guests