Hi All,
Hope this note finds everyone safe and healthy. I have a question for members.
We have a 1998 320 Voyager and have decided to do a much need upgrade to the interior upholstery. I have removed all the cushions, trim pieces, curtains, etc.
Does any member know how to remove the valances in the main cabin above the windows as well as the forward cabin ? Are they held in with the plastic anchors used on the trim or screwed in from some other point I dont see ?
Any advice or experience in this are would be greatly appreciated.
Cheers
Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
Valances
-
Capt Happy
Topic author
- Deck Hand
- Posts: 59
- Joined: May 17th, 2015, 4:55 am
- Vessel Info: 1974 16 Foot ex DFO Lapstrake Speedboat
1985 21 Foot Baby Cape Islander
1977 26 Foot Trojan F-26 Cruiser
1997 Carver 320 Voyager - Has thanked: 22 times
- Been thanked: 13 times
-
Jmoloney331
- Scurvy Dog
- Posts: 1
- Joined: April 4th, 2022, 1:29 am
- Vessel Info: 1999 Carver 356
- Location: LBI
- Has thanked: 1 time
Re: Valances
Following!
-
Capt Happy
Topic author
- Deck Hand
- Posts: 59
- Joined: May 17th, 2015, 4:55 am
- Vessel Info: 1974 16 Foot ex DFO Lapstrake Speedboat
1985 21 Foot Baby Cape Islander
1977 26 Foot Trojan F-26 Cruiser
1997 Carver 320 Voyager - Has thanked: 22 times
- Been thanked: 13 times
Re: Valances
Hey All,
Just moving it to the top of the pile, see if we get any input. Thks
Just moving it to the top of the pile, see if we get any input. Thks
-
bud37
- Admiral
- Posts: 4683
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 549 times
- Been thanked: 1145 times
Re: Valances
Don't have the same boat....but ours had plastic and the uppers were held on with velcro......some of the screws in different areas were quite well hidden to say the least.
The above is strictly my opinion always based on years of doing...remember to support local business , it pays back.
-
Capt Happy
Topic author
- Deck Hand
- Posts: 59
- Joined: May 17th, 2015, 4:55 am
- Vessel Info: 1974 16 Foot ex DFO Lapstrake Speedboat
1985 21 Foot Baby Cape Islander
1977 26 Foot Trojan F-26 Cruiser
1997 Carver 320 Voyager - Has thanked: 22 times
- Been thanked: 13 times
Re: Valances
Good Day All,
Have completed the interior upgrade. Could not get the Valances down without issues. Contractor doing the work, suggested that we wrap the existing ones in place. Very pleased with the results, enough room to tuck the inboard edge along the top of the original material and hot glued the backside. No concerns of bunching up or letting go, nice smooth finish.
Will post some pics, when back on dry land.
Happy and Safe Boating to Everyone.
cheers
Have completed the interior upgrade. Could not get the Valances down without issues. Contractor doing the work, suggested that we wrap the existing ones in place. Very pleased with the results, enough room to tuck the inboard edge along the top of the original material and hot glued the backside. No concerns of bunching up or letting go, nice smooth finish.
Will post some pics, when back on dry land.
Happy and Safe Boating to Everyone.
cheers
-
Capt Happy
Topic author
- Deck Hand
- Posts: 59
- Joined: May 17th, 2015, 4:55 am
- Vessel Info: 1974 16 Foot ex DFO Lapstrake Speedboat
1985 21 Foot Baby Cape Islander
1977 26 Foot Trojan F-26 Cruiser
1997 Carver 320 Voyager - Has thanked: 22 times
- Been thanked: 13 times
Re: Valances
A couple pics from new interior.
You do not have the required permissions to view the files attached to this post.
-
Capt Happy
Topic author
- Deck Hand
- Posts: 59
- Joined: May 17th, 2015, 4:55 am
- Vessel Info: 1974 16 Foot ex DFO Lapstrake Speedboat
1985 21 Foot Baby Cape Islander
1977 26 Foot Trojan F-26 Cruiser
1997 Carver 320 Voyager - Has thanked: 22 times
- Been thanked: 13 times
-
g36
- Admiral
- Posts: 1944
- Joined: April 7th, 2014, 6:07 pm
- Vessel Info: 1997 Carver 405
- Location: Soddy Daisy TN.
- Has thanked: 7 times
- Been thanked: 587 times
Re: Valances
Looks nice I'm sure your very happy with it
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
Crusader xli
The Black Pearl
Soddy Daisy Tn.
Return to “The Project Center”
Who is online
Users browsing this forum: No registered users and 13 guests
Sponsors