Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
1987 carver electrical problem
-
eanderson560
Topic author - Scurvy Dog
- Posts: 9
- Joined: June 8th, 2015, 2:52 pm
- Vessel Info: 1987 Carver Mariner
Re: 1987 carver electrical problem
-
eanderson560
Topic author - Scurvy Dog
- Posts: 9
- Joined: June 8th, 2015, 2:52 pm
- Vessel Info: 1987 Carver Mariner
Re: 1987 carver electrical problem
-
waybomb
- CYO Moderator
- Posts: 2407
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85
1996 Boston Whaler Rage 15 - Location: Saint Joseph,Mi
- Has thanked: 50 times
- Been thanked: 397 times
Re: 1987 carver electrical problem
I really don't remember how much they were but maybe 60 bucks each.
Get a card of numbers so you can wrap each wire with a number. Draw what you see.
Number the terminals.
Lotsa wires.
Take a number of pictures.
AND UNPLUG THE SHORE CABLES AND TURN OF THE GENSET.
Fred
1969 Glaspar Avalon /1969 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
-
Viper
- CYO Supporter
- Posts: 5803
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 431 times
- Been thanked: 1586 times
Re: 1987 carver electrical problem
waybomb wrote:Source of the post Check the relays.
Take the cover off. Be very careful. Line voltage in there.
Plug both cords in.
Have somebody start the genny. Watch the relays.
Do you know how to use a vom?
Check voltage to the two ac voltage mains.
At the relays, the two incoming cords go to them.
The genset goes to them. Yes, when on genset the two combine automatically.
One of the relays is not letting genset current through.
Or you have a bad connection at the non-air conditioning relay on the genset side.
Agreed
Return to “General Boating Discussion”
Who is online
Users browsing this forum: No registered users and 13 guests
Sponsors