Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

QL THRUSTER

ImageThis forum is for general discussion of all things Boating. If it's boating related and doesn't fit in another forum, post it here!
Post Reply
User avatar

Topic author United States of America
A Lee
Scurvy Dog
Scurvy Dog
Posts: 25
Joined: April 1st, 2018, 9:53 am
Vessel Info: 2005 56' Voyger
Location: Mississippi
Been thanked: 3 times

QL THRUSTER

Postby A Lee » May 10th, 2018, 9:35 am

I am having trouble locating a source for a replacement shear pin for a QL BP1300 thruster. Any suggestions would be much appreciated.
Top

User avatar

Canada
Lyndon670
Admiral
Admiral
Posts: 657
Joined: July 29th, 2013, 11:35 pm
Vessel Info: 2000 Carver 506
Volvo TAMD74EDC
Location: Georgian Bay
Has thanked: 124 times
Been thanked: 139 times

Re: QL THRUSTER

Postby Lyndon670 » May 10th, 2018, 6:26 pm

I was a member of the Silverton Club for years when I had my 42C. This was a common post question. Many boaters ended up having a shear pin machined by a machineshop since the QL thruster is no longer in production and parts are scarce.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
Top

Canada
Viper
CYO Supporter
CYO Supporter
Posts: 5803
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 431 times
Been thanked: 1586 times

Re: QL THRUSTER

Postby Viper » May 10th, 2018, 9:04 pm

I don't recall the size but last time I had to deal with that, I took the half of the pin that was left into a metal supply place, matched it up and cut the length I needed. Unfortunately I gave the rest to the boat owner.

Have you had a dealer contact Volvo directly? A lot of the QL parts will be listed as NLA but sometimes the boys at Volvo Parts can help out. You can also try to contact Volvo dealers and ask if they have the part in stock. Carver dealers are an option as well as they would have dealt with this occasionally and may still have some lying around.
Top
Post Reply

Return to “General Boating Discussion”



Who is online

Users browsing this forum: No registered users and 28 guests