Page 1 of 1
Pair of 3 Blade Props a L&R 18X20x1.25
Posted: March 13th, 2016, 3:03 pm
by mjk1040
I have a pair of brass 3 blade props, a left and a right if any one is interested. I would like $ 400.00 for the pair plus shipping if anybody is interested. I will double check all specs before finalizing the sale. If I can remember where I stored them, I'll get some pictures of them and post then here.
Mike
Re: Pair of 3 Blade Props a L&R 18X20x1.25
Posted: September 5th, 2016, 3:54 pm
by WeekendLove2
Do you still have props ???
I have a 1988 4207 with 454 crusaders - no you know if they will work on my boat?
Steve
(817) 205-6032
Re: Pair of 3 Blade Props a L&R 18X20x1.25
Posted: September 5th, 2016, 7:02 pm
by waybomb
Steve
Your props are probably in the 24x24 range and probably a 1.5" or 1.75" shaft.
The shaft diameter you can check from the engine room.
Props you'll have to check when hauled or maybe carver can tell you the stock size.
And I am sure they were 4 blades on ours
Re: Pair of 3 Blade Props a L&R 18X20x1.25
Posted: September 5th, 2016, 9:14 pm
by mjk1040
Steve; Waybomb is right, never really saw a Carver with 3-Blade Props and pretty sure your shaft is bigger. Let me know though. Mike
Re: Pair of 3 Blade Props a L&R 18X20x1.25
Posted: September 9th, 2016, 9:11 am
by Vinceaux
Carver did have 3 blade props. My 76 Santa Cruz has them, but I'm sure the newer ones have 4.