Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

My Middle Bass Island and Put In Bay Vacation

Chat with fellow Carver owners about cruising destinations and more. Plan rendezvous, raft ups & get together's here.
User avatar

Topic author United States of America
RGrew176
Admiral
Admiral
Posts: 6195
Joined: August 17th, 2015, 4:07 am
Vessel Info: 2022 Stingray 182 SC
Location: Southgate, MI.
Has thanked: 72 times
Been thanked: 462 times

My Middle Bass Island and Put In Bay Vacation

Postby RGrew176 » August 22nd, 2016, 4:21 am

On Monday August 8th I headed out for a weeks vacation. My destinations were Middle Bass Island and Put In Bay both in the Lake Erie waters of Ohio. As with many trips my first stop was the fuel dock to top off my tanks. I pumped in $249 dollars of gas totaling just over 74 gallons of fuel.

Image

The fuel price was down a bit from my previous trip a couple of weeks earlier. I departed the fuel dock at 10 AM headed down the channel and out onto Lake Erie.

I decided to try my run at hull speed. I throttled up to 1600 RPM and was making about 8 MPH. There were 25 MPH winds out of the northeast so the lake was a bit lumpy. I was battling 4' to 6' rollers on the lake off my forward port side. I really could not have run much faster even if I wanted to.

Image

I don't think my cell phone pics do justice to just how rough it really was. It was definitely a lumpy ride but still enjoyable. I pretty much had to stand all the way as there was just to much back and forth motion to sit down.

Passing West Sister Island just about the half-way point to Middle Bass Island.

Image

Running at 8 MPH I arrived at the entrance to Middle Bass Island State Park at 2:30 PM. A 4 1/2 hour trip. It sure was nice to finally be at my first destination. I called them on channel 69 and was told to go to dock 19. Since it was very windy and I was by myself I asked if I could have some assistance getting into my dock. They sent a person to assist me.

Image

The marina office. This is really a very nice marina. The showers are air conditioned so it dosen't get to steamy in the shower room. I highly recommend if you are in the area that you give this marina a try.

Image

My boat at the dock at MBI State Park.

Tuesday morning at 11 AM I departed MBI State Park and headed over to Put In Bay just a short distance away. I was looking forward to my visit there. I was last there August of 2010.

Image

Put In Bay here I come. Headed towards PIB's harbor.

Image

Viewing the Perry Peace Memorial Monument from inside the harbor on my way to the PIB docks. This monument stands as a memorial to those who perished in the Battle Of Lake Erie during the war of 1812. It also celebrates the 200+ years of peace between the USA and Canada.

Image

After docking at the PIB docks being hungry I headed to the Little Galley for a burger and fries. This is a great place for a burger and fries.

Image

Looking at the PIB docks from The Little Galley eating area.

Image

Sunset at Put In Bay August 9th.

At 10:30 AM I headed out from PIB towards School House Bay to set up for one of our regatta contests the flying mile. I was serving as the Committee Boat for the event. On my way out of the harbor I picked up some seaweed in my props. I throttled back to idle and tried to shift into neutral. My starboard transmission shifted into neutral but the port transmission would not shift into neutral. I ran below into the cabin and managed to shift the port side transmission into the neutral position. When I went back topside I noticed that the boat was turning to starboard. The port transmission was still engaged. I then shifted the port transmission into reverse and it killed the engine. I restarted the engine and tried a couple more times to shift into neutral but to no avail. My port side transmission was stuck in forward. Well, I still had my duties to perform so I throttled up both engines and headed out to set up for the flying mile. I ran out to my position and dropped anchor to await those boats that were going to run in the event.

The Flying Mile event is where boats throttle up to WOT and make a run towards the committee boat. I have a radar gun to take readings of the top end speed of each boat. There are several classes of boats and flags are awarded to the winners in each class. All in all 16 boats participated over two days. The fastest boat was a small offshore that ran a 50 MPH top end speed.

On Thursday I ran in the event as my partner took the radar gun from me and I made a run towards his boat. I ran a 25 MPH run at WOT. That pretty much matched the top end speed when I had my sea trial of the boat last year. It is the top speed that my boat will run. I took a 1st place flag in my class for the event. Good thing my transmission was stuck in forward and not reverse.

Image

My view from where I was set up for the Flying Mile contest. It was a hot and hazy day and the lake was calm.

Image

Looking at A Dock as it was filled with participants from the regatta.

Image

Sunset August 10th at Put In Bay.

Image

Sunset August 12th. It had been a wet and stormy day and this is just after the last thunderstorm had passed by.

On Thursday afternoon my AC decided to stop working. After checking the system I determined that the seawater pump to the AC unit had ceased working. The unit was installed in 1996 according to the paperwork that came with the boat. I guess 20 years service is pretty good. I will be purchasing a new seawater pump this week and plan to do the install myself.

Sunday morning August 14th the regatta was coming to an end so it was time to head for home.

Image

Good bye Put In Bay, hope to see you again next year.

I was glad that my tranny was stuck in forward. I decided to use both engines to head for home. Once clear of the harbor at PIB I throttled up to 2600 RPM. That gave me a running speed of 14 MPH. From the sounds the boat made this may very well be my boats sweet spot. Everything ran very well and everything seemed to be in sync. My fuel usage seemed very good. I believe that at that setting I was staying out of the secondaries of my 4 bbl carbs and fuel usage seemed to back that up. Crossing over at hull speed I used just under 1/4 tank. By the time I got back to Bolles Harbor I had used just over 1/2 tank.

Image

Heading home across Lake Erie. The conditions were ideal. Waves were less than a foot and the boat ran well.

I had decided that I was not going to try to get into my dock at my marina on one engine. I have to make 3 90* turns to get into my slip. When I got close to Bolles Harbor I called Tow Boat US on my cell phone and explained my situation to the person that answered. They said they would meet me outside the harbor entrance and tow me into the marina.

When I arrived at the entrance to Bolles Harbor the tow boat was waiting for me. He hooked himself up on my starboard side and towed me into the harbor. I called Trouts, my marina and explained my situation. They assigned me to an outside dock so the tow boat would only have to make 1 90* turn to get me into the slip.

Several of the boaters at the marina saw me being towed in and they walked over to the slip to assist me and the tow boat operator to get me into the slip. I have to say that the money I paid for the unlimited towing with Boat US was well worth the money spent.

All in all it was a great vacation and I had a lot of fun even though it was tempered by the transmission problem. I most likely will wait until next year to have the transmission fixed. My daughters wedding is next month and all the money I have saved over the last year is budgeted for the wedding.

I do plan to have it looked at and a rough estimate made. Perhaps it is a minor problem that I could have fixed yet this season. If not I will fix the A/C problem and use the boat as a dockominium for the rest of the season. For the record I did open the engine compartment hatch when the tranny problem first started to check the linkage. I shifted the transmission into forward and reverse and the lever on the transmission did shift both directions. I am then assuming that the problem is internal.

I wonder how many boat bucks it will take to fix the issue. On the bright side she did bring me home. And, I did have a great time so in the grand scheme of things that is good.
Rick Grew

2022 Stingray 182 SC

2004 Past Commodore
West River Yacht & Cruising Club


Canada
Viper
CYO Supporter
CYO Supporter
Posts: 5799
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 431 times
Been thanked: 1586 times

Re: My Middle Bass Island and Put In Bay Vacation

Postby Viper » August 22nd, 2016, 7:39 am

Great thread Rick.

Probably too late now and damage is done but did you check the tranny fluid? Sounds like clutch discs are stuck. Check colour of fluid and look for a burnt smell.

If the tranny has to come out and you're mechanically inclined, you can save yourself a lot of money by removing it yourself and sending it out for repair. It's not that bad a job; support the bottom of the engine at the bell housing (to the hull bottom with 2x4s etc.), spread the load as much as you can, remove the shift cables, neutral safety wiring, and oil lines, unbolt the shaft coupler from the tranny flange and pull the coupler and shaft back a foot if you can, unbolt the support mounts, and unbolt the tranny from bell housing. Pull the tranny back a couple of inches and she should come off. Be prepared for some weight. If there is direct access from above the tranny, a buddy with a rope to share the load really helps. Then it's a matter of manhandling it out of the hole and boat.

Before you do any of this, pump out the oil and check the bottom of the container for metal filings. If you see any there, make sure the oil cooler and lines are flushed thoroughly before putting it back into service. To be safe, I flush regardless when there's a tranny failure.

Putting the tranny back is just the reverse with the addition of checking alignment. If you're not comfortable with that part, get a marine technician to do it. Getting the tranny input shaft to line up perfectly on the splines might be a bit of a challenge too but it'll go eventually. Also check that the shift cable is properly adjusted for full tranny shift lever travel in forward and reverse, adjust as needed....this is important.
User avatar

United States of America
Dewmyster
Deck Hand
Deck Hand
Posts: 88
Joined: September 2nd, 2015, 7:43 pm
Vessel Info: 1998 370 Voyager
Location: North of Gosnold
Has thanked: 9 times
Been thanked: 12 times

Re: My Middle Bass Island and Put In Bay Vacation

Postby Dewmyster » August 22nd, 2016, 8:09 am

Wow, We just spent 11 nights out. Red Brook Harbor, Hyannis Marina, Oak Bluffs for the fireworks and home thru Cuttyhunk. I could never detail it the way you did Rick! Great story and no one was hurt so it's only money. That is how we measure it. :pirate:
:usa:
User avatar

United States of America
waybomb
CYO Moderator
CYO Moderator
Posts: 2404
Joined: February 5th, 2013, 9:24 pm
Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85
1996 Boston Whaler Rage 15
Location: Saint Joseph,Mi
Has thanked: 50 times
Been thanked: 396 times

Re: My Middle Bass Island and Put In Bay Vacation

Postby waybomb » August 22nd, 2016, 8:52 am

Nice story except for the problems.

To the point of flushing an oil cooler-in the offshore world, if we grenade something, the oil coolers get replaced along with the lines.

So many very expensive rebuilds have grenaded within a short time only to find left over shavings in the filter.

Just something to consider
Thanks
Fred
1969 Glaspar Avalon /1969 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft

Canada
Viper
CYO Supporter
CYO Supporter
Posts: 5799
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 431 times
Been thanked: 1586 times

Re: My Middle Bass Island and Put In Bay Vacation

Postby Viper » August 22nd, 2016, 9:18 pm

waybomb wrote:Source of the post ....To the point of flushing an oil cooler-in the offshore world, if we grenade something, the oil coolers get replaced along with the lines....

Totally agree Fred, have had to do that too if warranted but neglected to mention it above. Best way to go though to be sure.
User avatar

Topic author United States of America
RGrew176
Admiral
Admiral
Posts: 6195
Joined: August 17th, 2015, 4:07 am
Vessel Info: 2022 Stingray 182 SC
Location: Southgate, MI.
Has thanked: 72 times
Been thanked: 462 times

Re: My Middle Bass Island and Put In Bay Vacation

Postby RGrew176 » August 22nd, 2016, 10:25 pm

I am not going to attempt the job myself. If I were about 30 years younger perhaps I would give it a try. I will fix the A/C and probably get the transmission worked on next year. Daughters wedding comes first and I really need to save up some boating bucks before getting it fixed. My boat will be a floating condo for the rest of the season.
Rick Grew

2022 Stingray 182 SC

2004 Past Commodore
West River Yacht & Cruising Club

Return to “Boating & Cruising Lifesyle”



Who is online

Users browsing this forum: Google Adsense [Bot] and 12 guests