Does this TaMD 74 P have a fuel return system back to the tank...if so something else to check and can be the source of pressure, more fittings etc, the possible leak source. I can't see an external leak under a partial vacuum till it equalizes and there would be no real cause of vacuum on a return system, if it has one....IMO.
Regardless there should be no leak....
Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
466 fuel vent hose 2001
-
bud37
- Admiral
- Posts: 4689
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 550 times
- Been thanked: 1151 times
Re: 466 fuel vent hose 2001
The above is strictly my opinion always based on years of doing...remember to support local business , it pays back.
-
Viper
- CYO Supporter
- Posts: 5819
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 432 times
- Been thanked: 1599 times
Re: 466 fuel vent hose 2001
Even with a fuel return system there should be no added pressure to a traditional tank system even with a blocked vent. The system can't deliver more fuel to the tank than it extracted, and some of the extracted fuel would be used by the running engine, so again it should cause a vacuum. The returned fuel would be hotter so there may be some expansion, whether it's enough to offset is the question.
-
bud37
- Admiral
- Posts: 4689
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 550 times
- Been thanked: 1151 times
Re: 466 fuel vent hose 2001
There can be other reasons for pressure, but I for one don't know the exact type of system we have here. Let's wait and see what he finds so far.
The above is strictly my opinion always based on years of doing...remember to support local business , it pays back.
-
rfverdery
Topic author
- Scurvy Dog
- Posts: 21
- Joined: May 8th, 2022, 8:58 pm
- Vessel Info: 2001 Carver 466. Twin TAMD 74 P 480 Volvo’s.
- Location: Lewes Delaware
- Has thanked: 26 times
- Been thanked: 2 times
Re: 466 fuel vent hose 2001
I only had a few minutes to stop by the boat since posting. The drip stopped but I have not been able to find access to the fuel fill or vent hoses. Thanks for the information so far.
Return to “Carver Yachts Forum - Model Discussion”
Who is online
Users browsing this forum: No registered users and 15 guests
Sponsors