Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

1989 Carver Santego 2767 Completely Missing Part ID

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply
User avatar

Topic author Canada
DukeLang83
Scurvy Dog
Scurvy Dog
Posts: 11
Joined: January 29th, 2023, 3:45 pm
Vessel Info: 1990 Carver Santego 27
Location: Canada
Has thanked: 1 time

1989 Carver Santego 2767 Completely Missing Part ID

Postby DukeLang83 » July 16th, 2023, 8:09 am

Hello, I was checking the engine compartment and noticed that the port side is completely missing the part which is in the first two pictures. Looks like some kind of hydraulic component and the two lines that would feed it are ziptied to a hose above. Also, my port trim is not working. Does anyone know what the missing part is?Thanks!
You do not have the required permissions to view the files attached to this post.
Top

User avatar

United States of America
km1125
Admiral
Admiral
Posts: 3526
Joined: February 28th, 2017, 6:04 pm
Has thanked: 72 times
Been thanked: 1057 times

Re: 1989 Carver Santego 2767 Completely Missing Part ID

Postby km1125 » July 16th, 2023, 9:11 am

Not really sure, but could it be a power steering cylinder? Do you have twin engines and outdrives?
Top

Canada
Viper
CYO Supporter
CYO Supporter
Posts: 6069
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 460 times
Been thanked: 1711 times

Re: 1989 Carver Santego 2767 Completely Missing Part ID

Postby Viper » July 16th, 2023, 10:09 am

The missing part is a steering cylinder but you only need one in a dual sterndrive application. The two drives are hooked up together with a solid steering rod.

On the front port side of the port engine, look for the power steering pump, it'll have a cap on top of it that you can remove to check and top up steering fluid. Check to see if there is a belt on that pump. If there is, remove the cap and see if there is fluid in it. I suspect there isn't or it would be spewing out of the hoses in your pic as I don't see any end caps on them. The problem is you shouldn't be running those pumps dry even if they aren't doing any work. If there is no belt on the pump then no worries.

Looks like you have Alpha drives. I think I've already addressed the trim issue in your other thread.
Top
Post Reply

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 48 guests