Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

406 getting water in bildge when underway

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
User avatar

Topic author United States of America
pondering50
Scurvy Dog
Scurvy Dog
Posts: 15
Joined: June 24th, 2021, 4:58 pm
Has thanked: 4 times
Been thanked: 3 times

Re: 406 getting water in bildge when underway

Postby pondering50 » October 15th, 2023, 2:57 pm

Well pretty sure the majority is from swim deck. There is a silicone at the bottom just under the lip. It appears several gaps. Did have exhaust leaks. tightened clamps. still had water just not as much. So for me it's the swim deck. Going to get dinghy and should be accessible o perhaps I might be able to just lean over.

User avatar

United States of America
Wsullivan71
Scurvy Dog
Scurvy Dog
Posts: 47
Joined: February 20th, 2019, 5:35 pm
Vessel Info: 2001 Carver 404 Motor Yacht
Location: Marco Island, Fl
Been thanked: 12 times

Re: 406 getting water in bildge when underway

Postby Wsullivan71 » October 24th, 2023, 12:58 pm

Probably more of a culprit while sitting at the dock but the exhaust outlets on my 2001 404 leak and need to be re-bedded.
You do not have the required permissions to view the files attached to this post.
User avatar

Topic author United States of America
pondering50
Scurvy Dog
Scurvy Dog
Posts: 15
Joined: June 24th, 2021, 4:58 pm
Has thanked: 4 times
Been thanked: 3 times

Re: 406 getting water in bildge when underway

Postby pondering50 » October 24th, 2023, 3:45 pm

Thanks. I have access holes on swim deck and found loose exhaust clamps. Also recalked at back of swim deck under the lip.. As her aft rides really low coming up to plane and even so when underway there is a long of water turbulence. I going to take her out to test again in a few days. Currently chasing an oil pressure gauges as they are good at idle and while just sitting they drop out around 800/900 rpm and then come back when I am 1200 rpm and seemly underload running it drops more often. It's these little things that are driving me crazy.

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 90 guests