Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Boat polish or paint?

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
User avatar

Topic author
jaybla812
Scurvy Dog
Scurvy Dog
Posts: 1
Joined: May 27th, 2015, 12:38 pm
Vessel Info: 1989 Carver Monterey Cabin Cruiser

Boat polish or paint?

Postby jaybla812 » May 27th, 2015, 1:00 pm

Ahoy:
I own a 1989 Carver Monterey cabin cruiser.
The last couple of years the shine has faded more and more especially on the long blue strip along the sides.
I have tried several polishes and recently a rubbing compound with no luck. Last year I took it to an auto body shop, which helped for a while but still faded after a few weeks on the water.
I just can't get the color to "pop" like it used to.
All suggestions would be appreciated.
You do not have the required permissions to view the files attached to this post.

User avatar

United States of America
waybomb
CYO Moderator
CYO Moderator
Posts: 2404
Joined: February 5th, 2013, 9:24 pm
Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85
1996 Boston Whaler Rage 15
Location: Saint Joseph,Mi
Has thanked: 50 times
Been thanked: 396 times

Re: Boat polish or paint?

Postby waybomb » May 27th, 2015, 8:59 pm

Need to go to a marina that knows how to do this.

They will wet sand with a 600 and then maybe a 2000, then do a 3m perfect-it #1 (or similar heavy oxidation compound) with a Makita-type machine buffer, then #2, then a fine polish, and then a wax.

Or a similar procedure. My 36 went 11 years out in the weather untreated and unused and was severely chalked. I used 2000 wet sand, then Perfectit 1, 2, then 3m marine heavy oxidation restorer, and then a swirl remover, and finally covered it with a polymer. Looks like new. Many hours with that Makita buffing machine.
Thanks
Fred
1969 Glaspar Avalon /1969 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
User avatar

BobWaz
Scurvy Dog
Scurvy Dog
Posts: 10
Joined: March 27th, 2015, 11:56 am
Vessel Info: 1995 Carver 380 Santego 330 HP Crusaders

Re: Boat polish or paint?

Postby BobWaz » May 28th, 2015, 8:56 pm

There is a product called Vert Glass. The process is in I believe 4 steps. It is labor intense. If you specifically follow the directions, it will give great results. I had used this on the black on my Mastercraft.
User avatar

United States of America
Ramsport47
Commander
Commander
Posts: 376
Joined: February 10th, 2013, 7:13 am
Vessel Info: 1998 Carver 310 Santego
Has thanked: 72 times
Been thanked: 56 times

Re: Boat polish or paint?

Postby Ramsport47 » May 29th, 2015, 6:37 am

DO NOT USE VERT GLASS!!!!! It will start peeling off regardless if you do it properly or not!
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
User avatar

BobWaz
Scurvy Dog
Scurvy Dog
Posts: 10
Joined: March 27th, 2015, 11:56 am
Vessel Info: 1995 Carver 380 Santego 330 HP Crusaders

Re: Boat polish or paint?

Postby BobWaz » May 29th, 2015, 8:18 am

Vert Glass....As I said, specifically follow instructions. I re did my Mastercraft about 5 years later, then sold it. Had 2 friends that used it. One came out horrible, the other great and loves it.
User avatar

After Taxes
Deck Hand
Deck Hand
Posts: 84
Joined: September 21st, 2014, 9:55 am
Vessel Info: 'After Taxes'
2004 Carver Mariner 360
Lake Simcoe & Georgian Bay,
Ontario, Canada
Location: Lake Simcoe Marina
Has thanked: 6 times
Been thanked: 17 times

Re: Boat polish or paint?

Postby After Taxes » June 9th, 2015, 11:10 am

Hi.

Highly recommend you do the wet sand method as Waybomb suggested. I did that to a very sun-dulled 1989 Doral Montecello, but it looked showroom new afterwards. When I replaced the top, and with the hull shining, so many people asked me if it was a new boat. After this method, it was extremely easy to keep up appearances with normal waxing.

Go the wet sand method. You will be absolutely satisfied!

Respectfully,

Steve
You do not have the required permissions to view the files attached to this post.
2004 Carver Mariner 360
MerCruiser MX 6.2
Lake Simcoe, Ontario

Image

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: Google [Bot] and 36 guests