Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Malber Washer Replacement

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
User avatar

Topic author United States of America
dave907
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: January 5th, 2021, 9:59 pm
Has thanked: 11 times
Been thanked: 4 times

Malber Washer Replacement

Postby dave907 » December 19th, 2021, 8:01 pm

All:

I thought I would share this in case it can help someone else out in the future.

I recently purchased a 530 Voyager Pilothouse. About a month ago the Malber washing machine died. After failed attempt to find replacement parts for the washer, I decided to replace it.

The problem is that the door to the master stateroom is 20" wide. I could find no front loading washing machines that could fit through the door.

I'll spare all the attempted solutions that failed and cut to the finale: If you are in the same situation, purchase an "Equator" washer (I got mine off amazon for $1,100. I'll post the link to the amazon page here, but it will almost certainly stop working in a month or two. Equator 1.6 Cubic Foot Compact Washer. Part number ‎EW 824 N



If you remove the top panel, the back casing, the power cord, and push the drain hose into the casing, it fits through the stateroom door (barely).

We also removed the concrete counter weight on top of the drum. It makes it much easier to lift over the various "pinch points" from the aft deck, down the stairs, into the stateroom.

Attached is a picture of the new washer sitting next to the old Malber dryer.

Hope this helps someone out. Merry Christmas!

Dave
You do not have the required permissions to view the files attached to this post.


Canada
Viper
CYO Supporter
CYO Supporter
Posts: 5803
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 431 times
Been thanked: 1586 times

Re: Malber Washer Replacement

Postby Viper » December 19th, 2021, 11:13 pm

Good job. Thanks for the update Dave :down:
User avatar

United States of America
km1125
Admiral
Admiral
Posts: 3342
Joined: February 28th, 2017, 6:04 pm
Has thanked: 57 times
Been thanked: 968 times

Re: Malber Washer Replacement

Postby km1125 » December 20th, 2021, 9:23 am

Great find! Looks great in there too!
User avatar

United States of America
glynnalan
Scurvy Dog
Scurvy Dog
Posts: 10
Joined: February 3rd, 2022, 4:16 pm
Vessel Info: 2000 Carver 530 Voyager Pilothouse
"Tina Marina"
Location: Henderson NV
Has thanked: 5 times
Been thanked: 3 times

Re: Malber Washer Replacement

Postby glynnalan » June 6th, 2022, 4:29 pm

Thanks for sharing. I have the same boat and our washer just died- wont drain the water. Does the equator replacement need different fittings to replace? is the drain line easy to connect?
appreciate any pointers here
thanks
Glynn
User avatar

United States of America
glynnalan
Scurvy Dog
Scurvy Dog
Posts: 10
Joined: February 3rd, 2022, 4:16 pm
Vessel Info: 2000 Carver 530 Voyager Pilothouse
"Tina Marina"
Location: Henderson NV
Has thanked: 5 times
Been thanked: 3 times

Re: Malber Washer Replacement

Postby glynnalan » June 27th, 2022, 11:40 am

Hi Dave
I've ordered the equator and going to attempt the new install. any more tips or information on getting the washer in and out of the master stateroom door?
thanks
Glynn

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: Carvrcapn, Google [Bot] and 57 guests