Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Fuel Filler Hose Replacement 2002 564 CPMY

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
User avatar

Topic author United States of America
metjr1976
Scurvy Dog
Scurvy Dog
Posts: 6
Joined: August 26th, 2020, 6:10 pm
Vessel Info: 2002 Carver 564 CPMY
Buford, GA (Lake Lanier)
Purchased: October 2020

Fuel Filler Hose Replacement 2002 564 CPMY

Postby metjr1976 » December 28th, 2023, 12:38 pm

This is our first Carver and to our knowledge, the fuel fill hoses have not ever been replaced. We believe that they may be cracked because we smelled diesel in the salon but mostly in the aft master stateroom after about an hour after refueling. We only filled the tanks to about 2/3 full, so it isn't due to overfilling. I suspect that the hose(s) are cracked, but the access to replace them seems nearly impossible to get to. Are there any methods/tricks that I am missing to get to them? The issue seems to be particularly related to the starboard mid fuel tank. The fill hose seems to be sandwiched between the outer hull wall and the outer salon wall so that the fill opening is on the top of the railing wall...if that makes sense.
Any help would be appreciated as we really don't want to operate the vessel until this is solved!

User avatar

Canada
bud37
Admiral
Admiral
Posts: 4682
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 548 times
Been thanked: 1145 times

Re: Fuel Filler Hose Replacement 2002 564 CPMY

Postby bud37 » December 28th, 2023, 12:47 pm

Maybe consider removing the hose thru the deck fill hole. Remove the fill fitting and pull the whole works out thru there with a string attached for pulling the new back down..... hopefully the hose is not tie wrapped any where you can't get to. Check the vent hoses/fittings as well, they can rot the same including fuel feed fittings etc to the engines.
Worth a look , good luck with it. Perhaps someone with the same model has done this before.
The above is strictly my opinion always based on years of doing...remember to support local business , it pays back.

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 17 guests