I have a 1997 325 aft cabin with two 350 Crusaders. Flo-Scans were installed somewhere along the way by a previous owner. The starboard seems to work, but it jumps around a bit at times, and the total fuel used is way low. The port needle never comes off the peg, except to bounce around every now and then. Total fuel used on that side shows almost nothing.
Anybody recommend where I should start looking for this problem?
Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
Inacurate Flo-Scans
-
Steamboat Willie
Topic author - Scurvy Dog
- Posts: 15
- Joined: June 5th, 2013, 4:51 pm
- Vessel Info: 1997 Carver 325 Aft Cabin
- Location: New Smyrna Beach, FL
Inacurate Flo-Scans
David & Mary
1997 Carver 325 Aft Cabin
Nightmare
1997 Carver 325 Aft Cabin
Nightmare
-
waybomb
- CYO Moderator
- Posts: 2407
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85
1996 Boston Whaler Rage 15 - Location: Saint Joseph,Mi
- Has thanked: 50 times
- Been thanked: 397 times
Re: Inacurate Flo-Scans
Flo-Scan seems to be a good outfit - give their service department a call. There may be some simple checks to determine if it is the senders or the instrument.
But maybe the first thing to do would be to find a manual and double check the install. And the wiring connections, especially at the senders.
But maybe the first thing to do would be to find a manual and double check the install. And the wiring connections, especially at the senders.
Thanks
Fred
1969 Glaspar Avalon /1969 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1969 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Return to “Gas Engines/Transmissions”
Who is online
Users browsing this forum: No registered users and 40 guests
Sponsors