Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Water in bilge

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
User avatar

United States of America
Cooler
Admiral
Admiral
Posts: 1555
Joined: May 22nd, 2018, 12:09 pm
Vessel Info: 1995 Carver 330 Mariner
Twin 350XL Crusaders
Home port: Menominee, MI
Location: Green Bay, WI
Has thanked: 66 times
Been thanked: 368 times

Re: Water in bilge

Postby Cooler » July 6th, 2018, 8:30 am

Did you check your shower sump pump? If it is not working, either the float switch or the pump or both, are bad. Your AC condensate is going to the sump, filling the box, and leaking into the bilge. Good luck.
Cooler By The Lake
( All weather people have to say this on air, near lakes )

User avatar

United States of America
cpoint
Commander
Commander
Posts: 439
Joined: April 20th, 2016, 1:00 pm
Vessel Info: 2000 Carver 356 aft cabin
Has thanked: 201 times
Been thanked: 26 times

Re: Water in bilge

Postby cpoint » July 6th, 2018, 8:41 am

cooler, all pumps are working fine. water in bilge issue is resolved, I think it was just combination of small pockets of water coming from shower and swim platform. I sealed and replaced some old parts. Also the hand grab thingy on swim platform was cracked and leaking in, and there was always in that, from rain and from swim platform getting splashed when in motion. So I found it at west marine (HARKEN) and replaced it. All good now.
User avatar

United States of America
mjk1040
Admiral
Admiral
Posts: 1507
Joined: July 30th, 2015, 8:15 am
Vessel Info: 1998 355 AC/MY "Deja Vu"
Location: Savannah, NY
Has thanked: 9 times
Been thanked: 236 times

Re: Water in bilge

Postby mjk1040 » July 8th, 2018, 8:52 am

Believe I found my issue. Raised AC drip pan with another 3/8" rubber on the low end to force water to go to the drain on the other end. Also found that a raw water cooling hose at the AC unit was cracked and dripping both in and out of the AC drip pan. Recheck next week!
Mike :down:
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 43 guests