Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Carver 455 - Aft head blower

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
User avatar

Topic author
loupesj
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: January 30th, 2015, 11:01 am
Vessel Info: 1996 Carver 455
Been thanked: 1 time

Carver 455 - Aft head blower

Postby loupesj » January 30th, 2015, 11:05 am

Hi All,

Just bought this 1996 Carver 455 and the aft cabin head exhaust blower doesn't work - can anybody tell me how to find it please? Thanks in advance for any help you can offer!

Scott Loupe
"PFC John Paul"

User avatar

Papua New Guinea
PNGTaubada
Scurvy Dog
Scurvy Dog
Posts: 16
Joined: August 12th, 2013, 8:32 pm
Vessel Info: Carver 466 MY 2002
Has thanked: 1 time
Contact:

Re: Carver 455 - Aft head blower

Postby PNGTaubada » March 8th, 2015, 9:42 am

I had the same question. But eventually the light bulb went on and after exhaustive efforts to find them (without dismantling the cupboardry in the head!), they are actually accessed from little steel vents that you don't really notice on the outside of the boat. Mine were all ceased up ... now replacing them is a different matter ... you may have to get the screw driver out and remove some cupboardry ... and in my case, even remove parts that are siliconed / glued on ... I have a Carver 466 which I don't think is a great deal different, and I haven't bothered replacing them yet. However, I tried rotating them a bit and spraying some CR70 on them ... I think mine are too far gone. Anyway, I hope that helps.
User avatar

United States of America
Ramsport47
Commander
Commander
Posts: 376
Joined: February 10th, 2013, 7:13 am
Vessel Info: 1998 Carver 310 Santego
Has thanked: 72 times
Been thanked: 56 times

Re: Carver 455 - Aft head blower

Postby Ramsport47 » March 8th, 2015, 10:11 am

I'm thinking, on the 455, there should be some access panel in a cabinet, or they should be in an area where they could be readily accessed...some disassembly may be required...or LONG arms
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
User avatar

Papua New Guinea
PNGTaubada
Scurvy Dog
Scurvy Dog
Posts: 16
Joined: August 12th, 2013, 8:32 pm
Vessel Info: Carver 466 MY 2002
Has thanked: 1 time
Contact:

Re: Carver 455 - Aft head blower

Postby PNGTaubada » April 22nd, 2015, 10:36 pm

As mentioned, I gained access through a vent on the outside of the hull ...

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 107 guests