Page 1 of 1
Forward bilge. Pump
Posted: December 16th, 2015, 9:00 pm
by Rpratto
Have a 1986 Carver Santa Fe and can not figure out where the front bilge pump goes to ran a 20 foot snake through it and could not find out where it goes. No hoses run out through the hull fitting called carver and they do not know either think it runs water from front bilge to engine compartment bilge. Oh well
Forward bilge. Pump
Posted: December 16th, 2015, 10:54 pm
by SHEMP
Heres what I would do, put food coloring in the bilge water near your front pump, turn on the pump and look around for the colored water.
Forward bilge. Pump
Posted: December 17th, 2015, 6:22 am
by Ramsport47
If it is factory installed, it will not run back to the engine compartment...Carver never did something so "backyard". It has to go out the side a short distance from the pump. My guess would be on the same side as the galley sink, or possibly, the other side in the same area. I assume you have a 2667 Santa Cruz