Carver Owners Forum

Replacing the FWD bilge in my 2000 350 Mariner and have discovered a rat's nest of wires. CLEARLY, it has been messed up in the past, so I am trying to get it back to the correct way. Does anybody know where I can find a wiring schematic for the bilge pumps? As best as I can tell, there are (2) brown wires, (2) orange wires and (3) black wires. One of the brown wires has been cut and there is nothing attached to it. One of the orange has a splice in it, with a black wire coming off of it. NO idea what they have going on here, but I could use some help. I have a replacement Rule 2000 pump and an Johnson Ultima switch to go back in. Any idea or thoughts?

Here...page 32...the brown are one from battery and one from helm switch or should be according to the original....this is a 2001...the 2000 has the page missing...

If you go to the Carver Yachts site there is a drop down under owners with more stuff there........


http://www.carveryachts.com/media/4023/ ... _01-v1.pdf

Bud37, that was enough info for me to determine what I needed. Thanks so much!

Sweet, another happy inquirer!