Page 1 of 1
380 Santego thru-hull
Posted: September 29th, 2019, 10:15 pm
by MarkB
I just bought a1998 380 Santego. I can’t find the thru-hull valve to the head. Can anyone tell me where it is?
Re: 380 Santego thru-hull
Posted: September 29th, 2019, 11:31 pm
by Viper
Congrats and welcome aboard Mark.
What type of head do you have? Not all of them draw in sea water, some are hooked up to the on-board fresh water system.
Re: 380 Santego thru-hull
Posted: September 30th, 2019, 7:31 am
by bud37
Welcome to the forum........check out the drawing on page 3.4-1....link to manual on Carver Yacht site..
https://carveryachts.blob.core.windows. ... -380se.pdf
Re: 380 Santego thru-hull
Posted: October 1st, 2019, 12:55 am
by RGrew176
Welcome Aboard. Lots of knowledge here about Carvers and boats in general. You've come to the right place.
Re: 380 Santego thru-hull
Posted: October 1st, 2019, 1:04 pm
by waybomb
Welcome aboard!
Re: 380 Santego thru-hull
Posted: October 1st, 2019, 8:24 pm
by ColRon
Welcome aboard...glad to see another Santego owner!
Re: 380 Santego thru-hull
Posted: October 1st, 2019, 8:40 pm
by vineyardgray
Welcome aboard! Santego's are the best Carvers (don't tell the others)
Re: 380 Santego thru-hull
Posted: October 2nd, 2019, 11:16 am
by Cooler
If you have a Raritan electric head, then you are most likely drawing water from your on-board water tank. Raritan recommended that configuration to avoid clogging up the macerator with seaweed and whatever from raw water sources.
er
Re: 380 Santego thru-hull
Posted: October 2nd, 2019, 7:29 pm
by vineyardgray
My Raritan head draws water from the great outdoors - the valve is in the floor right outside the door