Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Lower helm blower switch works, upper helm switch doesn't. Ideas?

Discussion of batteries, chargers, wiring, generators, distribution panels, battery switches, etc.
User avatar

Topic author United States of America
boatingbob
Scurvy Dog
Scurvy Dog
Posts: 17
Joined: July 26th, 2015, 11:03 pm
Vessel Info: 1995 Carver 390 CPMY
Has thanked: 5 times
Been thanked: 1 time

Lower helm blower switch works, upper helm switch doesn't. Ideas?

Postby boatingbob » December 24th, 2015, 4:08 pm

I just bought a 1994 Carver 390 CPMY (gas) and love it. I'm learning how to do my own work. The lower helm station blower switch works fine, but the upper helm blower switch does not. The green indicator light does come on at the upper helm switch when the lower is used to turn the blower on.

Any ideas on how to troubleshoot/fix? Thanks in advance!


Canada
Viper
CYO Supporter
CYO Supporter
Posts: 2229
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807
Location: Ontario, Canada
Has thanked: 77 times
Been thanked: 428 times

Lower helm blower switch works, upper helm switch doesn't. Ideas?

Postby Viper » December 24th, 2015, 6:11 pm

With a volt meter, check to see if there is 12 volts on the source side of the switch. If there isn't, you need to work your way back from the switch to the power source such as the electrical panel checking all connections and plugs along the way. You likely have plugs under the upper helm, they tend to corrode. If there is 12 volts, turn the switch on and check for 12 volts on the load side of the switch. If you don't get 12 volts there, replace the switch. If you do get 12 volts, the problem lies after the switch. Could be wiring or again the plugs. Or, if the upper and lower helm switches are the same, remove the lower and hook it up to the upper helm and test. If it works up there, replace the upper switch. Keep track of exactly which wires go to each contact on the switches. Keep us posted.
User avatar

United States of America
Ramsport47
Commander
Commander
Posts: 376
Joined: February 10th, 2013, 7:13 am
Vessel Info: 1998 Carver 310 Santego
Has thanked: 72 times
Been thanked: 48 times

Lower helm blower switch works, upper helm switch doesn't. Ideas?

Postby Ramsport47 » December 25th, 2015, 7:36 am

First thing to do is gain access to the back of the switch to make sure it is still hooked up (behind the backrest of the fwd seat). Sometimes, wires will disconnect themselves if someone has run other wires over top of them. If the wires are attached, then start the testing process.
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio

Return to “Electrical”



Who is online

Users browsing this forum: No registered users and 1 guest