Carver Owners Forum

I have a 2000 356 and I am looking where to get the main 110v breaker for my boat. It is a 3 pole breaker but only has one switch. Tried West Marine but no help. Any Ideas ???????????

Try searching on Blue Sea site, probably supplied/made by them. https://www.bluesea.com/

They are out there. What style is yours... a rocker or a handle?

Here's one example, but it could be a Blue Seas or a Carling:

https://www.iboats.com/shop/paneltronic ... -coil.html

It is a carling its a single handle part Number is ab3-x0-00-065-3d1-c. Carver part # is 8900333

There should be an id sticker on there ....if so just get the info from it and match up......you can get them on Amazon as well.....probably Carling unless it has been replaced before you.

Fyi any switch you consider....just double check the spacing for the mounting screws...

Try Great Lakes skipper .com or fpmarine.com. Both have a lot of choices for breakers.

I had a similar three pole, single switch breaker and was told that they don't make them with internal links any more - I had to get one with two switches with an external "joining bar" (there is a name for this link but i'm drawing a blank)

It still fit in the same spot - just needed to drill another hole.