Page 1 of 1

TV replacement

Posted: June 17th, 2019, 3:48 pm
by Helmsman
I took a cue From SMcGuckins post on replacing his TV. Here is how I went about it. A little different than his approach but worked for me. I was able to pull the trim off and cut it to size. This also enabled me to take out the old TV and it’s mount. The first picture shows the opening with one side cut. I also cut the other side. A 32“ TV fits well in my case. I cut the trim around the old TV so that just the top and bottom were put back on. The image of the new cabinet is blurry.

4D0ADFB8-C293-4889-89F0-427F104CB447.jpeg
8B0D35A6-1EFA-4D7E-A3C0-89CA5868A6E0.jpeg

ED52FC49-4E00-4AFA-A53B-AC75531C7B7F.jpeg

24684D3E-0D5E-4C29-AA86-4AB284A9BBCD.jpeg

886CD01C-CB98-4B0E-9937-8E7DCB497248.jpeg

Re: TV replacement

Posted: June 17th, 2019, 7:32 pm
by g36
Looks good. You can never have too big of a tv :-D

Re: TV replacement

Posted: June 17th, 2019, 8:25 pm
by pepmyster
Looks great!!!!!