Purchased a new to us 1988 3227 Convertible that was not equipped with a windlass. A friend gifted me a Lofrans X2 he had as a spare, but I'm not sure where to install given small rode locker and limited deck space.
Has anyone installed a windlass on this year/model?
With appreciation,
Trev
Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
Windlass Install on a 3227
-
Viper
- CYO Supporter
- Posts: 6069
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 460 times
- Been thanked: 1711 times
Re: Windlass Install on a 3227
Welcome aboard Trev.
Hopefully a member with the same model will chime. Check the installation manual, there will be a minimum clearance measurement of how much space there must be between the top of your rode (rope/chain) when it's retrieved into the locker, and the bottom of the windlass. If that amount of space doesn't exist, don't install it. If the rode piles up against the unit, it'll interfere with proper operation and jam. If you have chain, and it piles up against the motor, it'll short out the contacts. If it's limited space in there, sell the unit and purchase a horizontal one that mounts completely above deck.
Hopefully a member with the same model will chime. Check the installation manual, there will be a minimum clearance measurement of how much space there must be between the top of your rode (rope/chain) when it's retrieved into the locker, and the bottom of the windlass. If that amount of space doesn't exist, don't install it. If the rode piles up against the unit, it'll interfere with proper operation and jam. If you have chain, and it piles up against the motor, it'll short out the contacts. If it's limited space in there, sell the unit and purchase a horizontal one that mounts completely above deck.
-
thewhirl
Topic author
- Scurvy Dog
- Posts: 2
- Joined: July 31st, 2021, 1:20 pm
- Vessel Info: 1988 Carver 3227 Convertible
- Location: Kingston Ontario Canada
- Been thanked: 1 time
Re: Windlass Install on a 3227
Thank you.
-
2468
- Scurvy Dog
- Posts: 3
- Joined: April 17th, 2019, 10:13 pm
- Vessel Info: 1989 3227
- Has thanked: 2 times
Re: Windlass Install on a 3227
Thanks for the info.....I am looking at the horizontal type (?) My next concern is what kind of backing plate to use or is there one already in the bow under/inside the pulpit?
Return to “The Project Center”
Who is online
Users browsing this forum: No registered users and 16 guests
Sponsors