Page 1 of 1
New member
Posted: April 25th, 2019, 2:25 pm
by Flying Beagle
We have our survey/sea trial next week for a 1991 Command Bridge 26. Not a lot of info on the interwebs that I’ve been able to find, so hoping to learn much here.
The engines are 4.3’s, new in ‘16 with 7 hours on them. Outdrives replaced in ‘17. New head, and a hard top over the bridge.
We are moving up from an ‘03 Sea Ray 225 Weekender, our first boat.
Re: New member
Posted: April 25th, 2019, 3:50 pm
by pepmyster
Wishing you all the luck in the world!!!!!! Hope all goes well!!!!!!!!!!!
Re: New member
Posted: April 25th, 2019, 4:46 pm
by Cooler
Good luck! Make sure your surveyor does a comprehensive moisture analysis on the hull and topside. Can't recall if the hull was cored or not, but the topsides are balsa cored. Hope it all works for you and we get you in the Carver gang. Let us know what happens!
er
Re: New member
Posted: April 25th, 2019, 5:33 pm
by waybomb
Good for you!
Re: New member
Posted: April 25th, 2019, 7:03 pm
by bud37
Welcome to the forum and hopefully Carver.....good luck with your upcoming trial and survey......
Re: New member
Posted: April 26th, 2019, 2:55 am
by RGrew176
Welcome Aboard. Good luck and we all hope it works out well for you.
Re: New member
Posted: April 26th, 2019, 6:39 am
by Viper
Welcome aboard. Hope everything works out in your favour. Keep us posted.
Re: New member
Posted: April 26th, 2019, 9:51 am
by g36
welcome