Page 1 of 1
Replacement Temperd Glass Side Panel
Posted: July 17th, 2016, 10:08 am
by Boatmiester
A 2002 Carver 444 CPMY Port side glass panel was damaged in accident and needs to be replaced. Carver saying they do not have the part. Any recommendations from the Carver community? Known dealers who may stock parts? This needs to be expedited.
Re: Replacement Temperd Glass Side Panel
Posted: July 17th, 2016, 10:46 am
by mjk1040
Did you try Taylor who make almost all the boat glass? Or a good Glass shop should be able to make it. Mike
Re: Replacement Temperd Glass Side Panel
Posted: July 17th, 2016, 6:30 pm
by Viper
Carver should be able to give you the part number so you can contact Taylor Made. They were likely the suppliers. You can also check the starboard side panel and see if there is info written on one of the corners of the glass, usually there is. Take down the info/numbers and give it to Taylor Made but tell them it's for the port side instead. If it's a Taylor Made product, it should say on the glass.
If it's a straight piece of glass, any auto glass shop can make it. If it's got a curve in it, it's likely they can't do it.
Re: Replacement Temperd Glass Side Panel
Posted: July 19th, 2016, 5:30 pm
by Lyndon670
I just had 2 panels made for my 506 at a glass shop, no issues.