Page 1 of 1

3807 Aft Deck seating ideas?

Posted: March 18th, 2015, 8:14 pm
by Wauchopia
Any suggestions on what has/ has not worked well for you? We just picked up this 1990 3807 and apart from the fridge and the bar (not that I'm complaining!), there is nothing there. As there is a banquette in the galley, do we really need another table and chairs? Maybe just chairs and a coffee table? I'm open to ideas and photos if you have them. We're generally travelling with 4-6 people aboard. Thanks!

Re: 3807 Aft Deck seating ideas?

Posted: March 19th, 2015, 6:26 am
by Ramsport47
I've seen several ideas from patio furniture to "pontoon" boat seating, to standard deck chairs. Pontoon boat seating is probably the most comfy, but certainly the hardest to move around, if you need to.

Re: 3807 Aft Deck seating ideas?

Posted: March 21st, 2015, 8:57 am
by Washopay
Hey Kenny Whaddya mean by pontoon seating? Thanks for the input!

Re: 3807 Aft Deck seating ideas?

Posted: March 21st, 2015, 10:58 am
by CYO Admin
Google "pontoon seating". It's modular seating that gets bolted to the deck but there is no reason you would need to bolt it down unless you frequent rough seas.

Re: 3807 Aft Deck seating ideas?

Posted: August 4th, 2016, 7:38 pm
by VapinBill
The one we are about to purchase have these.

Re: 3807 Aft Deck seating ideas?

Posted: August 4th, 2016, 8:11 pm
by tomschauer
I do believe those are pontoon seats that someone had the Carver logo added onto.

Re: 3807 Aft Deck seating ideas?

Posted: August 4th, 2016, 8:39 pm
by VapinBill
Thanks for the info, Tom.

Re: 3807 Aft Deck seating ideas?

Posted: August 4th, 2016, 8:52 pm
by tomschauer
If this type of seating interests you try Overton's.com
You can get custom colors and such at a reasonable price.

Re: 3807 Aft Deck seating ideas?

Posted: August 5th, 2016, 11:25 am
by waybomb
I knew a guy with a 48 Hat. He had custom seating made. Fiberglass frame with wrap around seating on top. Under the entire seating area was storage. When it was all done. It looked factory correct. The fiberglass wad painted with the same imron as the hull, and the vinyl matched the helm vinyl.
Very proper.