Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Port lites

The is the forum to discuss general information regarding all Carver Yachts.
User avatar

Topic author United States of America
Dave B
Scurvy Dog
Scurvy Dog
Posts: 2
Joined: July 5th, 2018, 5:12 pm
Vessel Info: 1987 Carved Aft Cabin. Twin Mercruiser 350s.
Location: Clayton, NY
Has thanked: 2 times

Port lites

Postby Dave B » July 5th, 2018, 5:20 pm

I have a 1987 Carved Aft Cabin. Anyone have an idea where I can purchase new rectangular port lites. Just need the plastic lenses, and new knurled knobs. Could use a part number for these. Not getting too far with Pompanette.
Thanks
Dave

User avatar

United States of America
km1125
Admiral
Admiral
Posts: 3355
Joined: February 28th, 2017, 6:04 pm
Has thanked: 60 times
Been thanked: 976 times

Re: Port lites

Postby km1125 » July 5th, 2018, 5:23 pm

There are some threads on here with the part numbers. Pompanette does have them and you can also find them slightly less expensive if you poke around on the Net (even though they come from Pompanette anyways)

Canada
Viper
CYO Supporter
CYO Supporter
Posts: 5819
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 432 times
Been thanked: 1595 times

Re: Port lites

Postby Viper » July 5th, 2018, 8:35 pm

Are they Bomar units? Did you try contacting Carver with your hull number and asking them for part number and manufacturer info? They're good at proving that. It may help in sourcing the replacements.
User avatar

Topic author United States of America
Dave B
Scurvy Dog
Scurvy Dog
Posts: 2
Joined: July 5th, 2018, 5:12 pm
Vessel Info: 1987 Carved Aft Cabin. Twin Mercruiser 350s.
Location: Clayton, NY
Has thanked: 2 times

Re: Port lites

Postby Dave B » July 6th, 2018, 11:35 am

I did speak with a Carved rep. He did politely refer me to Pompanette. I have called them twice, spoke with a somewhat abrupt lady who said she would have someone contact me, never happened. Would like to obtain the part number. My boat was made from 1983-1989 with the same port lites.
User avatar

United States of America
km1125
Admiral
Admiral
Posts: 3355
Joined: February 28th, 2017, 6:04 pm
Has thanked: 60 times
Been thanked: 976 times

Re: Port lites

Postby km1125 » July 6th, 2018, 1:50 pm

83 to 89 didn't have all the same lites. The 83-85ish had smaller ones than the later years. You'll notice that the later years only have two larger portlights on each side for the aft cabin (and head) but the earlier years had three smaller ones. I'm not sure of what sizes were on the forward ones in the later years. Mine are all the same - roughly 16" measured on the clear portion of the portlite

Return to “Carver Yachts Forum - Model Discussion”



Who is online

Users browsing this forum: No registered users and 31 guests