Page 1 of 1
1993 370 Voyager Prop Sizes
Posted: April 2nd, 2021, 8:38 am
by Tim Sperryn
Hi all
I’ve bought a boat that’s been under-propped!
Anyone know where I can find the prop specs for a 370 Voyager with Cummins 300’s?
(I am unable to e-mail Carver from the UK!!!)
Thanks
Desperate Tim
Re: 1993 370 Voyager Prop Sizes
Posted: April 2nd, 2021, 10:43 am
by Cooler
Tim, respond to this post with your hull I.D. number. I will contact Carver and see what size props were provided when the boat was shipped from the facility. If you are not comfortable publishing that number here, then PM me. Good Luck.
er
Re: 1993 370 Voyager Prop Sizes
Posted: April 7th, 2021, 10:30 am
by Tim Sperryn
You are a star!
HIN: CDRU9022J293
Twin Cummins 300’s...
Thanks so much for this, their ‘dealer’ in the UK is unresponsive as well...
Tim
Re: 1993 370 Voyager Prop Sizes
Posted: April 8th, 2021, 10:58 am
by Cooler
Just talked to Carver. They are looking up the build log. Should have the info a little later.
er
Re: 1993 370 Voyager Prop Sizes
Posted: April 8th, 2021, 11:52 am
by Cooler
OK, here it is. Original props were 18 X 18. Shaft is 1 3/8" The props were from Michigan Wheel. Part numbers are 350225 for the left turn, and 350224 for the right turn. If you want to contact Michigan Wheel, their US phone number is 800-369-4335.
Hope that helps.
er
Re: 1993 370 Voyager Prop Sizes
Posted: April 12th, 2021, 9:11 am
by Tim Sperryn
Sorry Cooler, I couldn’t access this site for a week (i live in medieval UK!).
Thank you very much for the info and the contact details, I’ve gone from the ‘dark’ to dimly lit, a major improvement!!! Tim