Carver Owners Forum

Hello - does anyone have a contact or website of where to purchase new mattresses for a 2003 Carver 396? Looking to replace both forward and aft cabin mattresses.
Thank you in advance!
Michelle

Most likely, you will have to have one custom made as I doubt you will be able to find one on the shelf. Easiest and cheapest way to go...put a 2” topper on your mattress and cut it yourself. Easy, peasy. It will make your mattress way more comfortable.

Did you try

https://www.replacement-mattress.com/ma ... -mattress/

They have specialty boat matresses in all different shapes and size.

I have a Carver 44 CMY and we just purchased a 10” foam mattress for the rear state room. It is a queen mattress and I will cut a radius on the corners so it will fit. I will cut the radius with a electric carving knife, after spraying the blades with a silicone spray. A tip from our marine upholstery guy. Was advised that there is no issue with cutting a full foam mattress to size, if it has coils or voids it would work out as good. It is also better if the mattress doesn’t have a quilted cover, a zip on cover is preferable.

The mattress is made buy Maxzzz and is available on Amazon.com. We paid under $300 for it. We will see how it goes. Others have commented on doing this in previous posts with great success.

Once I am done with this, I will work on the “V” birth. Probably take a king foam mattress cut to shape for our model.

Greg

https://www.thefoamfactory.com/mattress ... tress.html

We bought a queen latex mattress and cut it to fit. Very supportive and comfortable.

Thank you all for your responses! Much appreciated and all great advice.

Thank you all for your responses! Much appreciated and all great advice.

Here is a DIY option I did several years back. Worked very well and still as comfortable as the day I swapped them out. viewtopic.php?f=13&t=3240&p=25138&hilit=mattress#p25138