Hi all!
I'm needing to replace my throttle cables at both stations and I'm having trouble finding anyone who knows how long they are. I'm fairly sure that none of the 4 cables will be the same length. I could of course pull them out and measure, however the spaces they travel through are inaccessible at best. I really want to use the old cables to pull in the new ones.
Have any of you done this job?
Thanks,
Tyler
Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
1995 370 Voyager control cables
-
TDM4253
Topic author
- Scurvy Dog
- Posts: 1
- Joined: April 24th, 2020, 5:19 pm
- Vessel Info: 1996 Carver 370 Voyager
- Location: Washington State
-
Viper
- CYO Supporter
- Posts: 6201
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 468 times
- Been thanked: 1764 times
Re: 1995 370 Voyager control cables
Welcome aboard Tyler.
Take a look near the ends of the cables at both the engine and remote control. There will be a number stamped on them that tells you the type and length. The last set of numbers will be the length usually in inches; ......144" = 12 foot cable. You'll also need to ensure you get the correct style of cable as there are several configurations depending on your equipment. That model should make up part of the number on the cable as well.
Why do you need to replace them, are they stiff? Did you isolate the cables to rule out the remote control? Also make sure there are no tight turns as that will increase the amount of effort needed to shift or throttle.
Take a look near the ends of the cables at both the engine and remote control. There will be a number stamped on them that tells you the type and length. The last set of numbers will be the length usually in inches; ......144" = 12 foot cable. You'll also need to ensure you get the correct style of cable as there are several configurations depending on your equipment. That model should make up part of the number on the cable as well.
Why do you need to replace them, are they stiff? Did you isolate the cables to rule out the remote control? Also make sure there are no tight turns as that will increase the amount of effort needed to shift or throttle.
Return to “General Repairs & Maintenance”
Who is online
Users browsing this forum: No registered users and 78 guests
Sponsors