Page 1 of 1
Gel coat
Posted: June 5th, 2020, 3:19 pm
by throwback2
On 6/3/20,sanded taped and gel coated the port side deck on my 28' Carver.Today 6/5,did the other side.Used a 3" high nap roller that left the surface with a little texture that isn't slippery. Looks so much better.Also had to fix GPS/depth finder.Tracked it down to a ground wire that needed a new end on the buss bar.
Re: Gel coat
Posted: June 14th, 2020, 7:08 pm
by Marcq
Pics?
Marc..
Re: Gel coat
Posted: June 17th, 2020, 2:25 pm
by throwback2
That didn't work.
Re: Gel coat
Posted: June 17th, 2020, 2:33 pm
by throwback2
20200617_135418.jpg
20200617_135418.jpg
20200617_135312.jpg
Re: Gel coat
Posted: June 17th, 2020, 2:35 pm
by throwback2
Here are pix. What a pita to get pix up.
Re: Gel coat
Posted: June 22nd, 2020, 10:30 pm
by Marcq
Nice
Marc..
Re: Gel coat
Posted: June 23rd, 2020, 4:14 pm
by throwback2
Thanks,I'm going to re do this in the fall as the color isn't what I expected.I think I can get it closer to matching the rest of the side.
Re: Gel coat
Posted: June 24th, 2020, 9:35 am
by Cooler
I kinda like that 2 tone look. Probably really helps when accessing at night. The contrast would be easy to see.
er