Page 1 of 1
1996 Carver 370 Aft Cabin - water line size
Posted: March 9th, 2021, 5:06 pm
by rob37w
Need to replace a few fitting. It looks like 1/2” line. Is that correct?
Ordering this to replace the elbow that goes to the head water value. Just want to make sure it is indeed 1/2” pipe throughout the boat.
https://www.freshwatersystems.com/produ ... -x-1-2-nps
Re: 1996 Carver 370 Aft Cabin - water line size
Posted: March 9th, 2021, 5:34 pm
by chpsk8
My '95 355 Aft is 1/2" .
I was led to believe it was going to be 15mm, so I bought some 15mm connections online only to discover it was really 1/2" and I could get everything at Menards! Gotta love a WI built boat!
Re: 1996 Carver 370 Aft Cabin - water line size
Posted: March 9th, 2021, 6:48 pm
by bud37
My experience so far has been that the line size is generally printed somewhere on the hose. The other place to check if away from your boat might be the parts manual for your year, so long as it is available on the Carver Yachts site....they did use some different sizes over the years for sure.......double checking your specific boat is always the best idea.
Re: 1996 Carver 370 Aft Cabin - water line size
Posted: March 9th, 2021, 8:18 pm
by tomschauer
my 98 355 is also 1/2" pex.
Re: 1996 Carver 370 Aft Cabin - water line size
Posted: March 10th, 2021, 10:51 am
by g36
I also have 1/2 on my 97 405
Re: 1996 Carver 370 Aft Cabin - water line size
Posted: April 5th, 2021, 4:02 pm
by vgcapano
I have an 1989 Mariner Mariner 32. 1/2 tubing was standard for my model. I ended up removing most of the water lines and replacing them with 1/2 pex. I haven’t had a leak since.