Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

FOrward hatch replacement

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
User avatar

Topic author United States of America
tonyiiiafl
CYO Supporter
CYO Supporter
Posts: 902
Joined: November 19th, 2015, 4:00 am
Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
Location: Cape Cod, MA
Has thanked: 601 times
Been thanked: 193 times

FOrward hatch replacement

Postby tonyiiiafl » March 16th, 2022, 5:48 pm

With a few weeks to uncovering the old girl, I am planning on working under the shrink wrap this weekend and replace the forward Bowmar hatch. This was the one that was ripped off in the October Nor Easter here on Cape Cod. Getting the old one off will be a little tedious to break any adhesive that is holding it on.

However, what would you all suggest that I use as a sealer when I install the new hatch? Silkaflex? 4200?

Suggestions welcomed!

Thank you!

User avatar

Canada
Midnightsun
CYO Supporter
CYO Supporter
Posts: 2980
Joined: March 27th, 2016, 2:27 pm
Vessel Info: The Midnight Sun
2007 41CMY
Volvo D6-370's
Location: Montreal, Canada
Has thanked: 272 times
Been thanked: 1177 times

Re: FOrward hatch replacement

Postby Midnightsun » March 16th, 2022, 6:00 pm

I have always used Sikaflex for hatches and windows. This is what I was told to use way back and have always stuck with it (pun intended) :-D I would use a general one such as Sikaflex 291.
Cheers, Hans
2007 Carver 41 CMY
Twin Volvo D6-370's
Montreal, Canada
Midnight Sun I Photos
User avatar

Topic author United States of America
tonyiiiafl
CYO Supporter
CYO Supporter
Posts: 902
Joined: November 19th, 2015, 4:00 am
Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
Location: Cape Cod, MA
Has thanked: 601 times
Been thanked: 193 times

Re: FOrward hatch replacement

Postby tonyiiiafl » March 16th, 2022, 7:02 pm

Thank you. I have some that I was going to use for my solar install but uses 4200 instead. Hoping the old one comes off easily.
User avatar

Topic author United States of America
tonyiiiafl
CYO Supporter
CYO Supporter
Posts: 902
Joined: November 19th, 2015, 4:00 am
Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
Location: Cape Cod, MA
Has thanked: 601 times
Been thanked: 193 times

Re: FOrward hatch replacement

Postby tonyiiiafl » March 16th, 2022, 7:22 pm

I have a tube of 252 I was going to use on my solar install. What do you think of 252?
User avatar

Canada
Midnightsun
CYO Supporter
CYO Supporter
Posts: 2980
Joined: March 27th, 2016, 2:27 pm
Vessel Info: The Midnight Sun
2007 41CMY
Volvo D6-370's
Location: Montreal, Canada
Has thanked: 272 times
Been thanked: 1177 times

Re: FOrward hatch replacement

Postby Midnightsun » March 17th, 2022, 7:10 am

You may be overthinking this, 291, 4200 or 252 will work fine in your application. Just apply a small bead, just enough to seal out rain water. As long as it is not a permanent type like 5200 you will be on the right track. Sticking to the fiberglass is not an issue as anything will stick and the same goes for the hatch assuming it is aluminum. My hatch was plastic so silicone was out of the question however any of the 3 mentioned above would work well.
Cheers, Hans
2007 Carver 41 CMY
Twin Volvo D6-370's
Montreal, Canada
Midnight Sun I Photos
User avatar

Canada
bud37
Admiral
Admiral
Posts: 5100
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 597 times
Been thanked: 1275 times

Re: FOrward hatch replacement

Postby bud37 » March 17th, 2022, 8:31 am

Just to add, clean the mating surfaces real well, especially if someone has put silicone of some type in there.... :-O
FWIW.....The above is just my opinion.
User avatar

Topic author United States of America
tonyiiiafl
CYO Supporter
CYO Supporter
Posts: 902
Joined: November 19th, 2015, 4:00 am
Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
Location: Cape Cod, MA
Has thanked: 601 times
Been thanked: 193 times

Re: FOrward hatch replacement

Postby tonyiiiafl » March 17th, 2022, 8:52 am

Thank you. I do tend to keep things in the “design” stage too long before going into operation mode.
User avatar

Topic author United States of America
tonyiiiafl
CYO Supporter
CYO Supporter
Posts: 902
Joined: November 19th, 2015, 4:00 am
Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
Location: Cape Cod, MA
Has thanked: 601 times
Been thanked: 193 times

Re: FOrward hatch replacement

Postby tonyiiiafl » March 19th, 2022, 7:56 pm

DONE. 1.75 hours. That Silkaflex was brutal to squeeze out of a caulking gun!

Out with the old inWith the new. Our hatch was destroyed during the October 2021 storm. Finally got a replacement and the installation went great. Yes prep is 99% of the success. And I added the Bomar combo shade/screen inside piece. No more insterting screen and also can use shade to keep sun out during the hot days of summer. One step closer to launch day. Yes Admiral is happy as she got the new hatch and the combo sceeem shade. Always keep the admiral happy. Always.
27DE3E5D-F001-4AF1-BC99-B7E09144E756.jpeg
25DFDF34-2883-459B-A452-6DECA57FA596.jpeg
045B0279-6D3E-4079-BBCF-E783723509A6.jpeg
49641369-93EC-4F0B-9292-C246235C5B30.jpeg
123334BB-BD15-4C3D-9799-266C4AD8898D.jpeg
6CEA65B7-E44C-4C10-A3D9-AEAC0EFDE684.jpeg
AC727724-0CD7-4191-9931-6AD4AF51A6BD.jpeg
CEB5F0D4-9D91-416B-828C-7E79DB63D35A.jpeg
AFAC4E0C-194A-43F8-8799-80D07B1CD37F.jpeg
You do not have the required permissions to view the files attached to this post.

Canada
Viper
CYO Supporter
CYO Supporter
Posts: 6187
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 467 times
Been thanked: 1759 times

Re: FOrward hatch replacement

Postby Viper » March 19th, 2022, 9:05 pm

Good job :down:
User avatar

United States of America
RGrew176
Admiral
Admiral
Posts: 6519
Joined: August 17th, 2015, 4:07 am
Vessel Info: 2023 SunTracker Party Barge 22 DLX
Location: Southgate, MI.
Has thanked: 72 times
Been thanked: 468 times

Re: FOrward hatch replacement

Postby RGrew176 » March 20th, 2022, 2:53 am

Looks good. Nice job.
Rick Grew

2022 Stingray 182 SC

2004 Past Commodore
West River Yacht & Cruising Club

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 106 guests