Carver Owners Forum

Where is it located on the engine and how do I replace it. Hasn't been changed in 2 seasons...

Thanks!

Figured you mean 8.1.....heres the manual i added some screen shots on the next post. .....https://www.crusaderengines.com/wp-cont ... 001-10.pdf

Here's some info

ehschneider wrote:Source of the post Where is it located on the engine and how do I replace it. Hasn't been changed in 2 seasons...

Thanks!

I think what g36 has posted........if you could ad the year and engine size in your vessel info it would help greatly.

6.1 liter gas engines

I still cant find where it is.

Does your engine look like this ?

Just trying to help, I assumed it was 8.1 but even if its a 6.0 it's still the same crusader fuel cell that's referenced in the 8.1 manual I posted for the part number you listed. If installed its refernced for both motors and your part number is shown . If you google crusader fuel cell theres pics and Also shown in the previous post pic If you can't see that fuel cell on the engine where are you getting the part number? Maybe it's not installed on the motor? can you post some pics of the engine? If you follow the fuel line to the engine what is it connecting to first and then what?

ehschneider wrote:Source of the post I still cant find where it is.

Follow the fuel line.
FWIW, on my Crusader 8.1's, my engine mounted, secondary Racor 110A filter assy (2 micron) is on the port side, kinda low mounted towards the rear of the engine. I also have separately mounted primary Racor 10 micron.

Rare beast that 6.1. Searched quite a bit only to find they were only produced for a very short period of time. Could not even find it on crusaders classic engine site. Only reference I was able to dig up was on another forum posting.

The label on the plastic cover says 6.1. According to a local marine supply shop, they were only produced for a couple of years and in limited quantity.

I would contact Crusader with your inquiry, they surely can put some light into your question.