Page 1 of 1
1988 3607 aft cabin
Posted: June 6th, 2023, 1:47 pm
by Davet
Hey folks!.....can someone help me? I'm trying to locate the raw water thru hull inlet. Also, I lost my owners manual and schematic diagrams....or I wouldnt be asking this question in the first place..lol. I used to go to the carver site.....but we all know how that works out now. Bombarded by "manual spam"
Re: 1988 3607 aft cabin
Posted: June 6th, 2023, 2:03 pm
by km1125
Which one? There are several.
In my 3607, they were all located ahead of the engines. There were two for engines (one port, one stbd) and there was another one on the port side that fed both the heads and was "T'd" off to feed the HVAC strainer and pump that I added. If I had a genset, the raw water for that would have been ahead of the stbd engine.
Re: 1988 3607 aft cabin
Posted: June 6th, 2023, 2:08 pm
by Davet
Im sorry...to feed he forward and aft heads.
Re: 1988 3607 aft cabin
Posted: June 6th, 2023, 6:38 pm
by buster53
I used to have a 3807, yes, a different boat, but I had 7 thru hulls and all were in the engine room.
Re: 1988 3607 aft cabin
Posted: June 6th, 2023, 7:29 pm
by km1125
Should be right in front of the port engine. Mine didn't have a strainer, just went from the seacock to a "T" fitting, then to each head.