Page 1 of 1
bow wash down coupler and Screen door replacement
Posted: July 29th, 2024, 12:00 pm
by OHANA13
HEy Everyone, new to this forum and wanted to know if the adapter for the bow wash down is specific to Carver or if I can find a replacement somewhere (Lost mine)
is there a good spot online to order carver parts?
Also same question for the screen door? (no longer slides easily and is a pain in the butt to open/close)
Re: bow wash down coupler and Screen door replacement
Posted: July 29th, 2024, 6:53 pm
by Viper
Is this what you're talking about? It's a Jabsco washdown deck fitting and quick connecter. If not, post pics. The Jabsco is available on Amazon.
Re: bow wash down coupler and Screen door replacement
Posted: July 29th, 2024, 8:14 pm
by OHANA13
Thats the one! I bought it on Amazon but it wont fit into the existing female port?
Re: bow wash down coupler and Screen door replacement
Posted: July 29th, 2024, 8:47 pm
by bud37
As for the screen door......first clean the track real good and see if the wheels are still round and turning.
The glass door is another story , but clean and you can try lubricating the slide at the top, you will see where the wear is....if that is no joy then the seal/slide material ,( can't remember the official term for it ) needs to be replaced. That keeps the space so the door does not rub against the upper frame.
There is a thread here quite some time back about it on that model.
Re: bow wash down coupler and Screen door replacement
Posted: July 29th, 2024, 9:24 pm
by Viper
Did you buy the Jabsco one or a different brand? Do you know if the one on the boat is a genuine Jabsco?