Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
- Global announcements
- Latest Posts
View the latest post 1990 carver montego 2557
- Posted by: Jewles3491 » May 22nd, 2024, 4:15 pm
- Forum: The Project Center
I am in need of finding the dimensions of the V-berth bed so I can have a new foam mattress made? where would I find this information?
Views: 28 • Comments: 2 • Write comments
View the latest post Attachment(s) Water hiding under the aft cabin floor 1983 3607
- Posted by: safeguard » May 21st, 2024, 5:47 pm
- Forum: General Repairs & Maintenance
I have identified a leak coming from my port exhaust. The leak is a small stream of lake water continously flowing about 1/8" wide. It was identified last season and i requested repairs that are happening now. The question is this. That water never made it to my bilge pump. This model has no aft pump, nearest is engine room and it's dry. At cabin smells like someone died. I pulled all the carpet, plywood floor is dry. Where might this water be hiding. How do i drain it, best way to deal with the odor.
Thanks so much in advance
Views: 82 • Comments: 7 • Write comments [ Read all ]
View the latest post Ac intake water valve location
- Posted by: Buggin321 » May 21st, 2024, 12:40 pm
- Forum: AC/Heat, Plumbing & Sanitation
Quick and easy question. Newbie here and looking to turn on ac system. Where is the intake water valve located thank you
1988 3227
Views: 69 • Comments: 5 • Write comments
View the latest post 1996 380 Santego - Battery Recommendations .
- Posted by: cjblovinlife » May 20th, 2024, 7:43 pm
- Forum: Electrical
OK everybody I’m looking for some ideas and experience. It’s about time for me to replace the batteries on this boat. I’m seeing a lot of talk about lithium batteries for house and AGM for cranking. Does anybody have any experience with Marine lithium batteries? What would you recommend it does have a Knoco charger that is capable of charging lithium, but I’m not sure if there are any other electronic components that would need to be upgraded.
As always thanks so much for your wisdom
Views: 59 • Comments: 2 • Write comments
View the latest post Carver 3607 in Michigan
- Posted by: Dsbrown » May 20th, 2024, 2:36 pm
- Forum: Carver Boats For Sale
This is the one!
1986 Carver 36 aft cabin. The lowest time Carver 36 around with less than 500 hours on two MerCruiser 7.4L engines. Always professionally maintained with winter storage indoors heated since new. Includes summer 2024 slip at Safe Harbor Toledo Beach Marina, fall haul-out, and first option for indoor heated storage this fall.
Onan 6.5kw generator, remote start, runs great.
100ah Lithium battery house bank (separate from the starting battery) with a new charger and monitor (will run the fridge and lights all weekend on the hook without running the generator).
Garmin Chart plotter with digital fuel flow for each engine. (NMEA 2000 backbone).
New VHF with MMSI Emergency call & GPS location.
Older radar but it works.
Bluetooth radio.
Ice Maker
Range with oven, Microwave
Two heads with showers, one with a tub, both have electric heads, one is full “house” sized.
Private aft cabin with queen pedestal bed and in-suite head.
Private FWD berth sleeps two.
Settee converts and sleeps two.
Futon in main salon sleeps one and a half.
Forward bench on flybridge converts to a single bed as well.
Flybridge has seating for six and four more on the aft deck.
Three reverse cycle heat/AC units.
Numerous upgrades in the last couple of years:
New canvas enclosure just completed spring 2024.
Fresh bottom paint before launching this spring.
New carpet throughout last season.
Props were overhauled/balanced in 2022
Two new bilge vent blowers.
New 120/12v SS refrigerator.
New hot water heater.
Two smart TVs.
All lights inside and out converted to LED. (except for the remote-control spotlight)
Overhauled windlass and new rode in 2022. (controls from flybridge)
The sale will include all furniture, all required safety equipment (and then some), Bumpers, lines & fenders. Also, some tools and spares specific to the boat.
Only selling due to purchasing a smaller boat.
There are no issues, and everything works as it should.
This boat needs absolutely nothing!
Asking $47,900
please PM, email, or text for pics or with questions
donbrowncfi gmail.com
989-four94-two 077
Views: 53 • Comments: 0 • Write comments [ Read all ]
View the latest post FNG
- Posted by: TBD » May 19th, 2024, 5:19 am
- Forum: Introduce Yourself!
1st time boat owner, went with the 86' Carver 3607. I'm excited to get some of the smaller projects done.
I'm starting with the AC systems, which are currently non-functioning. Does anyone know where to get original schematics?
Views: 135 • Comments: 4 • Write comments
View the latest post 2002 Carver 410 Sport Sedan engine power isdue
- Posted by: Geeman » May 18th, 2024, 8:02 pm
- Forum: General Boating Discussion
We purchased our boat in Dec of 2023. Back in April we had been boasting for about 3hrs with a mixture of cruising and idling. When we went to get up on plain we couldn’t get past 10 knots. We ended up getting into a harbour for the night. We checked fuel, transmission and engine fluids. All good. Had a diver check underwater and all good. Next day went to head home and the boat got up on plain with no issues for the next 3 days.
Fast forward to yesterday and we were boating from Victoria to Seattle and were 2hrs into the cruise when the starboard engine powered down. When ended up doing 10 knots to Seattle. The starboard engine would not idle below 1400 or go above 1800. It appears that the throttle is adjusting properly as I played with it on the engine but could not improve on the RPM.
Fuel filters are new in Oct 2023 and have less then 20hrs on them. The mechanic that has worked on the boat the last 10yrs is stumped on what the cause could be.
To add to this. When we ran both engines to get the boat at 10knots. The swim platform was 2” under water. When we ran only the port engine with the boat at 10 knots. The swim platform was 2-4” above the water line.
The boat has the Twin Cummins 5.9-BTA Diamond Series 330 HP diesels
I tried to get a mechanic to look at the boat today with no success. I have some mechanical skills when I have direction on what I should be looking for. I am thinking it may be a linkage issue between the bridge and engine. Does not seem like a fuel supply issue but could be wrong on that. I did check the shut offs in the engine room incase one had shaken closed a bit.
Any thoughts or advice are much appreciated. Thanks in advice.
Views: 124 • Comments: 2 • Write comments [ Read all ]
View the latest post Attachment(s) What is inside the stringers?
- Posted by: tonyiiiafl » May 18th, 2024, 6:51 pm
- Forum: General Repairs & Maintenance
1994 Carver 390 CPMY. I am mounting a Fireboy automatic fire extinguisher. It must be mounted upright, not horizontal. Anyway the only place I can mount it is against the port stringer in front of the port engine. I drilled a hole in the top of the stringer and used a scope to check what was inside and it was clean and clear. SO…….I drilled a hole about 4” from the bottom, and after I went through the fiberglass, (1/2” or so thick) The drill stopped and I saw metal/steel shavings and I stopped. Is there a steel plate inside the stringers? I also thought about making a bracket of 1/4” steel with a 90 degree bend at the top, then run it down to the where the hull mergers the stringer. then mount the backer onto the bracket..
Any opinions or does anyone know what is inside the stringers?
best always……
Tony
Views: 143 • Comments: 5 • Write comments [ Read all ]
View the latest post carver 27 santego at low speed
- Posted by: confused_bloke » May 18th, 2024, 5:50 pm
- Forum: Carver Yachts Forum - Model Discussion
hi, the title really says it all, how does a carver 27 santego handle at low speeds? (in case there are hull variations for this model, its advertised as a full displacement hull by the broker)
we intend on using it on the thames, where the speed limit is 8 kts
we just need to know if its going to drift across the top of the river like the fjord 24 we had previously, or whether it will hold a straight line
any help would be greatly appreciated
Views: 141 • Comments: 8 • Write comments
View the latest post Salon light dimmer
- Posted by: Essej » May 18th, 2024, 12:10 pm
- Forum: Electrical
Hello Everyone,
New to the forum and Carver...
I have been given the project of upgrading almost everything on a 2007 56 Voyager. So far I have upgraded all the navigation (Garmin), Radar, auto pilot, TVs (5), sound bars, speakers, woofers and AV sound processor, Main radio and remote radio, Starlink, NEMA2000 network and Garmin marine network, onboard WIFI and cordless land line phones.
That being said, now comes the hard part that I cannot find any info on. Finding the OEM dimmer
I need to change all the OEM interior lights and I am now looking at the OEM dimmer with the up and down buttons. It has three gray cables. I have new dimmers that replace the existing ones, but I cannot find where the OEM dimmer module is.
Can anyone help guide me to where I should be looking for it? Is it Posible that the dimmer is in the two rocker switches on the wall?
Views: 157 • Comments: 6 • Write comments [ Read all ]
-
- Topics
- Posts
- Last post
-
-
Introduce Yourself!Are you a new member? Stop in and say hi!
- 1132 Topics
- 8856 Posts
-
Last post
Re: FNG
by ColRon View the latest post
May 22nd, 2024, 4:58 pm
-
-
- 771 Topics
- 6418 Posts
-
Last post
Re: Winter boat storage. 36 …
by km1125 View the latest post
May 22nd, 2024, 7:50 pm
-
-
Carver Yachts Forum - Model DiscussionThe is the forum to discuss general information regarding all Carver Yachts.
- 814 Topics
- 5590 Posts
-
Last post
Re: Anybody here trailer a 28…
by Jangocat View the latest post
May 22nd, 2024, 6:17 pm
-
-
-
Boating & Cruising LifesyleChat with fellow Carver owners about cruising destinations and more. Plan rendezvous, raft ups & get together's here.
- 153 Topics
- 1842 Posts
-
Last post
Re: 2024 launch season ???
by Cooler View the latest post
May 11th, 2024, 9:57 am
-
-
- Topics
- Posts
- Last post
-
- 420 Topics
- 3874 Posts
-
Last post
Re: 1990 carver montego 2557
by buster53 View the latest post
May 22nd, 2024, 9:45 pm
-
-
General Repairs & MaintenanceAnything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
- 1688 Topics
- 12135 Posts
-
Last post
Re: Water hiding under the af…
by km1125 View the latest post
May 23rd, 2024, 12:43 am
-
-
-
Gas Engines/TransmissionsGAS engine, transmission and generator repair and maintenance discussion forum.
- 581 Topics
- 5951 Posts
-
Last post
Re: Disassemble 355 aft cabin…
by mjk1040 View the latest post
May 15th, 2024, 6:09 am
-
-
-
Diesel Engines/TransmissionsDIESEL engine, transmission and generator repair and maintenance discussion forum.
- 163 Topics
- 1086 Posts
-
Last post
Re: Loss of power
by Coldcruisin View the latest post
May 13th, 2024, 6:31 pm
-
-
-
Electronics & NavigationDiscussion of radars, GPS, autopilots, stereos and TV's. Also iPad and other mobile navigation devices.
- 233 Topics
- 1587 Posts
-
Last post
Anyone running Maretron N2KVi…
by JeffandErin View the latest post
May 17th, 2024, 4:44 pm
-
-
-
AC/Heat, Plumbing & SanitationDiscussion of AC's, plumbing and sanitation related issues.
- 468 Topics
- 4006 Posts
-
Last post
Re: Ac intake water valve loc…
by buster53 View the latest post
May 22nd, 2024, 10:27 pm
-
-
-
ElectricalDiscussion of batteries, chargers, wiring, generators, distribution panels, battery switches, etc.
- 525 Topics
- 5300 Posts
-
Last post
Re: 1996 380 Santego - Batter…
by Cooler View the latest post
May 22nd, 2024, 11:28 am
-
-
- Topics
- Posts
- Last post
-
-
Carver Boats For SaleList your Carver Yacht for sale here. All listings are free for active form members! ALL ADS ARE FREE - USERS MUST HAVE AT LEAST 10 POSTS TO PLACE AN AD
- 109 Topics
- 338 Posts
-
Last post
Carver 3607 in Michigan
by Dsbrown View the latest post
May 20th, 2024, 2:36 pm
-
-
-
Boat Parts For SaleUsed boat parts, used Carver boat parts, trailers, dinghies, outboards, props...everything but the boats they were attached to. ALL ADS ARE FREE - USERS MUST HAVE AT LEAST 10 POSTS TO PLACE AN AD
- 244 Topics
- 974 Posts
-
Last post
Re: 22x22 Left and Right Prop…
by ataylor233 View the latest post
May 3rd, 2024, 1:43 pm
-
- Who is online?
In total there are 174 users online :: 4 registered, 0 hidden and 170 guests
Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot], Midnightsun
- Newest members
- Username Joined
Jewles3491 22 May
Buggin321 21 May
Catanae 21 May
Revrac 20 May
jel31 19 May
SarahM 19 May
terry.wheeler1 19 May
TBD 19 May
- Statistics
- Totals
Total posts 63120
Total topics 7509
Total Announcements: 0
Total Stickies: 4
Total Attachments: 5876
Topics per day: 2
Posts per day: 15
Users per day: 3
Topics per user: 1
Posts per user: 6
Posts per topic: 8
Total members 10388
Our newest member Jewles3491
- Birthdays
- No birthdays today
In the next 30 days
No members have a birthday within this period of time.
- Sponsors