Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

It's official we now own a 3607 aft cabin !

The is the forum to discuss general information regarding all Carver Yachts.
User avatar

Topic author Canada
denders
Deck Hand
Deck Hand
Posts: 78
Joined: August 24th, 2015, 6:21 pm
Vessel Info: 1985 Carver 3607 Aft Cabin
Has thanked: 2 times
Been thanked: 24 times

It's official we now own a 3607 aft cabin !

Postby denders » August 29th, 2020, 5:01 pm

It's official , we are now the proud owners of a 3607 aft cabin !! We are going to winter in indoor storage and then see about transporting it from Gimli Manitoba to Kenora Ontario. ( Canada for those more southern folks )

Anyone have experiance moving one of these ? I am hearing 14 ft loaded as "Bridge Limit" but I am thinking the upper helm at least has to come off to make that number.

Thanks in advance and glad to be back here ! :approve:

User avatar

United States of America
km1125
Admiral
Admiral
Posts: 3624
Joined: February 28th, 2017, 6:04 pm
Has thanked: 78 times
Been thanked: 1093 times

Re: It's official we now own a 3607 aft cabin !

Postby km1125 » August 30th, 2020, 10:53 am

There is a thread on here where someone transported a 3607 and they did remove the bridge and bridge surround.

Underneath the bridge station there are a few multi-conductor cable connectors that can be pulled apart, but anything added by a previous owner might have to be cut and sliced. The bridge surround ("horseshoe") will come off pretty easily but if you have antennas mounted you'll need to trace the routing of those cables and either cut them or pull them back from their source. The shift, throttle and steering assemblies can be removed from the helm and just tied up and laid on the bridge floor so you don't have to disconnect them.
User avatar

Topic author Canada
denders
Deck Hand
Deck Hand
Posts: 78
Joined: August 24th, 2015, 6:21 pm
Vessel Info: 1985 Carver 3607 Aft Cabin
Has thanked: 2 times
Been thanked: 24 times

Re: It's official we now own a 3607 aft cabin !

Postby denders » August 30th, 2020, 8:29 pm

Thanks for that info - I will be checking with a couple of movers and a local mechanic to see what we can do. I will let everyone know when we get the move done
User avatar

United States of America
phatboat
Scurvy Dog
Scurvy Dog
Posts: 6
Joined: September 20th, 2020, 4:14 am
Vessel Info: 1985 3607
Location: Maine

Re: It's official we now own a 3607 aft cabin !

Postby phatboat » October 6th, 2020, 5:41 pm

15 feet.
That is why mine is staying on the hard at the marina and not going to my barn.
User avatar

United States of America
km1125
Admiral
Admiral
Posts: 3624
Joined: February 28th, 2017, 6:04 pm
Has thanked: 78 times
Been thanked: 1093 times

Re: It's official we now own a 3607 aft cabin !

Postby km1125 » October 6th, 2020, 6:47 pm

i'm curious if they allow you into the indoor storage over the winter. That would be a great time to prep the boat for moving, as you could cut and label all the wiring and even put in connectors for reassembly. Depending on their age, you might even just consider ripping out the old VHF antennas and installing new ones at the destination, rather than trying to splice those cables.
User avatar

Topic author Canada
denders
Deck Hand
Deck Hand
Posts: 78
Joined: August 24th, 2015, 6:21 pm
Vessel Info: 1985 Carver 3607 Aft Cabin
Has thanked: 2 times
Been thanked: 24 times

Re: It's official we now own a 3607 aft cabin !

Postby denders » October 6th, 2020, 7:46 pm

Thanks all - the recommended mover has stated the fly bridge has to come off. We do have access over the winter so , yes , .... prepping for a spring move. Although the existing marinia is closer to home , just the wrong lake !
User avatar

Canada
Evan'sWay3607
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: March 12th, 2021, 10:44 am
Vessel Info: 1986 Carver 3607 aft cabin 40 LOA
Location: Okanagan Lake BC
Has thanked: 3 times
Been thanked: 5 times

Re: It's official we now own a 3607 aft cabin !

Postby Evan'sWay3607 » March 12th, 2021, 11:51 am

Good luck with your move.

In 2012, we moved our 3607 from Thousand Islands to Okanagan Lake BC using a pro boat mover.

Everything above salon roof came off : aft hard top, radar arch, flybridge, upper helm station.

The big job is the upper helm -- lots of wiring to disconnect / reconnect.

Hope your move goes (went?) smoothly.

Safe boating :approve:

Return to “Carver Yachts Forum - Model Discussion”



Who is online

Users browsing this forum: No registered users and 25 guests